Some Parts Books And Microfiche Show Wrong Governor And Fuel Pump Drive Groups For Specific Engines{1288,0374}
Usage:
3208 Truck Engines ( 32Y)
Some Parts Books and Microfiche show wrong governor and fuel pump drive groups for specific 3208 Engines. Since the gear and weight assembly which controls the timing advance is part of the drive group, this error also shows wrong application of the gear and weight assemblies for the engine timing advance.
Until the necessary corrections can be made, use the chart that follows as a reference for the correct drive groups, gear and weight assemblies, and engine timing advance.
Caterpillar Information System:
1981/06/29 Tube Added To Prevent Air Leakage In Pressure Regulator{3012,3165,3166,3186}
1981/06/29 New Gasket Used For End Cover On Inlet Manifold{1058}
1981/06/29 Use 6V4828 Snap Ring Pliers To Remove Snap Rings From Turbocharger Housing{0610,1052}
1981/06/29 New Inlet And Exhaust Valves And Valve Guides Have Tighter Fit To Prevent Corrosion And Guide Wear{1104,1105,1101,1103,1108,1109}
1981/06/29 New Gasket Used In Front Housing Group{1166,1162,1151}
1981/06/29 Ring Now Used To Hold Bearing In Auxiliary Drive Group{1165}
1981/06/22 Larger Air Cleaner Used For Less Restriction To Air Flow{1051}
1981/06/22 Cylinder Liners Can Now Be Reconditioned Automatically{0664,0674,1216}
1981/06/22 6V3145 Leveler Now Available{0644}
1981/06/15 Plastic Cases Now Available For Electronic Testing And Diagnostic Equipment{0630,0650}
1981/06/15 Procedure To Stop Lubricant Leakage From Flexible Couplings{3252}
1981/06/08 Remanufactured Clutch Plates Available For Power Shift Transmissions{3155,0375}
1981/07/06 6V3176 Relief Valve Available For Center Hole Double Acting Hydraulic Cylinders{0623}
1981/07/06 New Turbocharger, Turbocharger Oil Line And Aftercooler Air Lines Group Used{1052}
1981/07/06 Mailing Of Engine News And Truck Engine News Microfiche Libraries{0374}
1981/07/06 All Size Identification Marks On Engine Bearings Are Now Shown In Millimeters{1000,1230,1219,1203}
1981/07/06 New Retainers Used To Hold Oil Pump Output Tube In Manifold{3314}
1981/07/06 Single Connector Prevents Leakage From Fuel Filter Lines Groups{1274,1262}
1981/07/06 Stronger Fitting Used With Sending Unit For Oil Pressure Gauge{7457,7451,3310,3314}
1981/07/06 Use 6V4068 Tool Group To Machine Camshaft Thrust Face{0663,1253}
1981/07/06 6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier{0621}
1981/07/06 Use 6V4172 Injector Sleeve When You Clean Fuel Injectors{0622,1250}
1981/07/13 Add New Information To Two Current Guidelines For Reusable Parts{0374}
1981/07/13 Use 6V4805 Valve Seat Extractor Group To Remove Valve Seat Inserts{0621}