Ring Now Used To Hold Bearing In Auxiliary Drive Group{1165}
Usage:
3408 Industrial And Marine Engines
Description of Change: A ring has been added to the auxiliary drive group (right hand rear) for 3408 Industrial And Marine Engines.
The ring has been added on the shoulder of the gear. It will not let the bearing slide off the gear.
Formerly, no ring was used; the bearing had a press fit. At times, it was possible for the bearing to move off the shoulder of the gear.
Adaptable To: The 8J8322 Ring is adaptable to the 4N8505 Auxiliary Drive Group on all 3408 Industrial and Marine Engines.
Location of the 8J8322 Ring.
Caterpillar Information System:
1981/06/22 Larger Air Cleaner Used For Less Restriction To Air Flow{1051}
1981/06/22 Cylinder Liners Can Now Be Reconditioned Automatically{0664,0674,1216}
1981/06/22 6V3145 Leveler Now Available{0644}
1981/06/15 Plastic Cases Now Available For Electronic Testing And Diagnostic Equipment{0630,0650}
1981/06/15 Procedure To Stop Lubricant Leakage From Flexible Couplings{3252}
1981/06/08 Remanufactured Clutch Plates Available For Power Shift Transmissions{3155,0375}
1981/06/08 Troubleshooting Water In Shut-Off Solenoid Housing{1259}
1981/06/08 Inspect Piston Skirts During Engine Overhaul Procedures{1214,1213}
1981/06/01 Hardened Nuts And Higher Torque Now Used In Ahead And Astern Clutch Groups{3302}
1981/06/01 New Service Meter Used In Mechanical Shutoff Group{7478}
1981/06/01 Some Single Part Numbers Have Two Half Bearings{7551}
1981/06/01 New Seals And Clutch Discs Used{3300,3302}
1981/06/29 New Gasket Used In Front Housing Group{1166,1162,1151}
1981/06/29 New Inlet And Exhaust Valves And Valve Guides Have Tighter Fit To Prevent Corrosion And Guide Wear{1104,1105,1101,1103,1108,1109}
1981/06/29 Use 6V4828 Snap Ring Pliers To Remove Snap Rings From Turbocharger Housing{0610,1052}
1981/06/29 New Gasket Used For End Cover On Inlet Manifold{1058}
1981/06/29 Tube Added To Prevent Air Leakage In Pressure Regulator{3012,3165,3166,3186}
1981/06/29 Some Parts Books And Microfiche Show Wrong Governor And Fuel Pump Drive Groups For Specific Engines{1288,0374}
1981/07/06 6V3176 Relief Valve Available For Center Hole Double Acting Hydraulic Cylinders{0623}
1981/07/06 New Turbocharger, Turbocharger Oil Line And Aftercooler Air Lines Group Used{1052}
1981/07/06 Mailing Of Engine News And Truck Engine News Microfiche Libraries{0374}
1981/07/06 All Size Identification Marks On Engine Bearings Are Now Shown In Millimeters{1000,1230,1219,1203}
1981/07/06 New Retainers Used To Hold Oil Pump Output Tube In Manifold{3314}
1981/07/06 Single Connector Prevents Leakage From Fuel Filter Lines Groups{1274,1262}