1981/03/23 Caterpillar


6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}

Usage:


All Direct Injection 3300 Series Engines equipped with 7N8622 Air/Fuel Ratio Controls

SUPPLEMENT: 05/18/81

SERVICE MAGAZINE, MARCH 23, 1981, PAGE 1. In the article, "6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control," two changes are necessary.

...Change the subtitle to: "All Direct Injection 3300 Series Engines Equipped With 7N8622 Air/Fuel Ratio Controls."

...Change the first sentence to: "The 7N8622 Air/Fuel Ratio Control is used on some direct injection 3300 Series Engines equipped with scroll fuel systems.

--------------- END SUPPLEMENT ---------------

The air/fuel ratio control is used on direct injection 3300 Series Engines with scroll-type fuel systems. All of the air/fuel ratio controls are adjusted to the same setting at the factory.

The 6V2029 Fixture Group holds the air/fuel ratio control for adjustment on the Caterpillar Fuel Injection Test Bench.

The complete procedure for adjustment of the air/fuel ratio control will be available to add to the Fuel Injection Test Bench Book.


Illustration 1. The 6V2029 Fixture Group.


Illustration 2. The air/fuel ratio control installed in a 6V2029 Fixture Group on a Caterpillar Fuel Injection Test Bench.

Caterpillar Information System:

1981/03/16 New Shield Assemblies Used In Water Shielded Manifold Group{1067}
1981/03/16 New Inlet And Exhaust Valves And Valve Guides Have Tighter Fit To Prevent Corrosion And Guide Wear{1104,1105,1101,1103,1108,1109}
1981/03/16 5P1075 And 5P1076 Washers Have A Different Design{7553,0680}
1981/03/16 Approximate Liquid (Refill) Capacities Added To Specifications Page In Parts Book{0374}
1981/03/09 Clean Electrical Contacts In Exhaust Gas Recirculation (E.G.R.) Switch Group And Cover Assembly Before Installation{1080}
1981/03/09 New Aftercooler Core has Improved Design To Prevent Vibration Damage Which Lets Coolant Into Engine Air Inlet{1064}
1981/03/09 Correct Installation Of Inserts Necessary During Repairs To Prevent More Counterbore Cracks{1217,1201}
1981/03/09 Special Studs And Nuts Available For Exhaust Manifolds On Engines Used In Heavy Load Conditions{1059,1101}
1981/03/09 Test Procedure For Exciter Reactors On SRSE Generators{4454}
1981/03/09 New Poppet Valves And Piston Available As Replacement Parts; Automatic Center Punch Can Be Used To Install Piston{3012,0622,0626,3166,3185}
1981/03/09 Correct Preparation Is Important To Prevent Damage During Extended Periods Of Storage{7500}
1981/03/02 Check Oil Level Carefully To Prevent Operation With Too Much Oil In Engine Crankcase{1316}
1981/03/23 6V4009 Dowel Driver Available {0622,1101}
1981/03/23 Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23 Longer Cable Assembly Now Used In The 9S2000 Flowmeter {0651}
1981/03/23 Correction To Torque Specification For Locknuts On Valve Clearance Adjustment Screws Of Engines Equipped With Jacobs Engine Brakes {1119,1102}
1981/03/23 New Tool Makes Glow Plug Wire Removal Easier {0622,0621,1403}
1981/03/30 Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30 Low Engine Temperatures: Install Check Valve{1353,1355,1370,1380}
1981/03/30 6V3197 Spacer, 6V3041 Tool Group Available For Use During Removal and Installation Of Piston Pin Bearings{0622,1219,1218,1214}
1981/03/30 6V3150 Engine Pressure Group Gives Direct Indication Of Manifold Pressure{0651,1058}
1981/03/30 Electrical Information For EGR (Exhaust Gas Recirculation) Systems On 3208 Truck Engines So Equipped{1080}
1981/03/30 Brass Plug Now Used Instead Of Steel Plug In Sea Water Aftercooler{1063}
1981/04/06 Woodward Governor Available For Parallel Generator Applications{1289,1264}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.