1981/03/30 Caterpillar


Brass Plug Now Used Instead Of Steel Plug In Sea Water Aftercooler{1063}

Usage:


All D379, D398, And D399 Engines Equipped With Sea Water Aftercoolers

Description of Change: The sea water aftercooler for D379, D398 and D399 Marine Engines now uses brass plugs instead of steel plugs. It was possible for the steel plugs to be damaged by corrosion caused by the sea water.

Adaptable To: The brass, 8B8817 Plug is a direct replacement for steel plugs 3J5388 and 2B858, in this application. It is Caterpillar's recommendation that the brass plug be ordered when a replacement plug is needed.

Caterpillar Information System:

1981/03/30 Electrical Information For EGR (Exhaust Gas Recirculation) Systems On 3208 Truck Engines So Equipped{1080}
1981/03/30 6V3150 Engine Pressure Group Gives Direct Indication Of Manifold Pressure{0651,1058}
1981/03/30 6V3197 Spacer, 6V3041 Tool Group Available For Use During Removal and Installation Of Piston Pin Bearings{0622,1219,1218,1214}
1981/03/30 Low Engine Temperatures: Install Check Valve{1353,1355,1370,1380}
1981/03/30 Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/23 New Tool Makes Glow Plug Wire Removal Easier {0622,0621,1403}
1981/03/23 Correction To Torque Specification For Locknuts On Valve Clearance Adjustment Screws Of Engines Equipped With Jacobs Engine Brakes {1119,1102}
1981/03/23 Longer Cable Assembly Now Used In The 9S2000 Flowmeter {0651}
1981/03/23 Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23 6V4009 Dowel Driver Available {0622,1101}
1981/03/23 6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/16 New Shield Assemblies Used In Water Shielded Manifold Group{1067}
1981/04/06 Woodward Governor Available For Parallel Generator Applications{1289,1264}
1981/04/06 New Spacer And Plate Used In Transmission Lower Shaft Groups{3307}
1981/04/06 New Temperature Range Recommendation For Multi-Viscosity Oil In Power Shift Transmissions{3179,3155,3159}
1981/04/06 Use Heat-Indication Products To Measure Parts Temperatures{0651}
1981/04/06 Cooling System Cleaner Removes Rust And Corrosion{1350,1353,1354}
1981/04/06 Correct Refill Capacity For Engine Oil{1318}
1981/04/06 New Piston Ring Assemblies Give Improved Ring And Cylinder Liner Life{1215,1213}
1981/04/06 Improve Use Of Engine Service Manual Microfiche{0374}
1981/04/13 Use 6V4058 Universal Extension To Remove And Install Starter Bolts{0612}
1981/04/13 New 6V3060 EGR System Tester Group Available{1080}
1981/04/13 Use Two Wrenches On Fuel Line Nuts{1254,1252}
1981/04/13 New Ahead Main Shaft Assembly Gives A Tighter Fit; Dimensions For The Fit Of Shafts And Gears{3300}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.