Two Thinner Spacers Available For Use During Adjustment Of Off-Engine Timing Dimension{1251,0653}
Usage:
D330 And D333 Industrial And Marine Engines
During adjustment of the off-engine timing dimension for scroll fuel systems used on D330 and D333 Industrial and Marine Engines, spacers are removed and added to get the correct dimension. Two new, thinner spacers are available for this purpose.
The 9N6495 Spacer is 4.11 mm (.162") thick, and the 9N6496 Spacer is 4.22 mm (.166") thick.
Add these part numbers and thickness dimensions to the chart, "Spacers And Lifters For Timing Dimension Setting," on page 19 of "Checking Off-Engine Timing Dimension Setting With 5P6600 Timing Fixture Group," Special Instruction, Form No. SMHS7130-02.
Caterpillar Information System:
1980/11/17 Coolant Conditioner Elements Are Now Available For 3208 Engines{1350}
1980/11/17 Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed{1315,1302}
1980/11/17 Improved Cable Assembly For Mechanical Shut-Off Group{7418}
1980/11/10 6V3147 Main Bearing Wrench Now Available{1203,0612}
1980/11/10 Special Tools Available To Tighten Retainer Nuts For Clutch Drive Hubs Of 7211 And 7221 Marine Transmissions{0612,0626,3302}
1980/11/10 Double-Check Those Dimensions{0374}
1980/11/03 Spider And Bearing Assembly Must Be Correctly Installed In Drive Shaft-To-Power Control Box Universal Joint{5234,5204,5201}
1980/11/03 FT1523 Fuel Oil System With External Filter Is Available{0652}
1980/11/03 Two Replacement Lights Available For 5P7277 Voltage Tester{0651}
1980/11/03 FT1514 Lubrication Manifold Permits Lubricant To Be Added To The Output Shaft Bearings Without Removal Of Rear Cover From Fuel Injection Test Bench{0652}
1980/11/03 Pulley With Keyway Can Be Used When Replacement Alternator Is Installed{1405}
1980/11/03 Check Valve Added To Hydramechanical Shut-Off{7418,1286,1307}
1980/11/17 6V4021 Piston Ring Compressor Group Available{1215,1214,0622}
1980/11/17 Tee-Test Plug And Pressure Tap (Connection) Plugs Can Be Tightened To A Higher Torque To Prevent Leaks{5050,0651}
1980/11/17 Use Dust Cap To Prevent Freon Leakage From Air Conditioner; Cap Is Available As Replacement Part{7320}
1980/11/17 Some Remanufactured 3406 Engines Have The Wrong Reference Serial Number On The Identification Plate{7557,1000}
1980/11/24 New Decals Permit Easier Identification Of Fuel System Settings On Most Truck Engines{7557}
1980/11/24 New Aftercooler Core Has Copper-Nickel Tubes For Increased Strength{1063,1064}
1980/11/24 Use Fluid-Type Vibration Damper To Control Vibrations{1205,3305}
1980/11/24 New Gasket Improves Operation Of Shut-Off Groups{7418,7403}
1980/11/24 6V4008 Valve Seat Extractor Now Available{1103,0622}
1980/11/24 Replacement Wheel Available For Service Of 6V97 Engine Stand Group{0626}
1980/12/01 Direct Inquiry Service Information Retrieval System (SIRS) Available To U.S. And Canadian Dealers{0374}
1980/12/01 Exhaust Manifold And Air Lines Groups Changed To Prevent Exhaust Leakage And Damage To Manifold Gaskets And Mounting Studs{1059,1061}