1980/11/17 Caterpillar


Use Dust Cap To Prevent Freon Leakage From Air Conditioner; Cap Is Available As Replacement Part{7320}

Usage:


All Caterpillar Machines Equipped With Air Conditioners

The 5P2912 Compressor Fitting, used on all Caterpillar machines equipped with air conditioners, has a valve through which the air conditioner is charged with Freon.

Many parts books do not give a part number for the 2L1224 Cap (dust cap) used on the 5P2912 Compressor Fitting. It is Caterpillar's recommendation the dust cap be used.

The dust cap will not permit dirt to get in the valve, and it will prevent Freon leakage through the valve. The 2L1224 Cap is available as a replacement part.


Location of dust cap on 5P2912 Compressor Fitting.

Caterpillar Information System:

1980/11/17 Tee-Test Plug And Pressure Tap (Connection) Plugs Can Be Tightened To A Higher Torque To Prevent Leaks{5050,0651}
1980/11/17 6V4021 Piston Ring Compressor Group Available{1215,1214,0622}
1980/11/17 Two Thinner Spacers Available For Use During Adjustment Of Off-Engine Timing Dimension{1251,0653}
1980/11/17 Coolant Conditioner Elements Are Now Available For 3208 Engines{1350}
1980/11/17 Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed{1315,1302}
1980/11/17 Improved Cable Assembly For Mechanical Shut-Off Group{7418}
1980/11/10 6V3147 Main Bearing Wrench Now Available{1203,0612}
1980/11/10 Special Tools Available To Tighten Retainer Nuts For Clutch Drive Hubs Of 7211 And 7221 Marine Transmissions{0612,0626,3302}
1980/11/10 Double-Check Those Dimensions{0374}
1980/11/03 Spider And Bearing Assembly Must Be Correctly Installed In Drive Shaft-To-Power Control Box Universal Joint{5234,5204,5201}
1980/11/03 FT1523 Fuel Oil System With External Filter Is Available{0652}
1980/11/03 Two Replacement Lights Available For 5P7277 Voltage Tester{0651}
1980/11/17 Some Remanufactured 3406 Engines Have The Wrong Reference Serial Number On The Identification Plate{7557,1000}
1980/11/24 New Decals Permit Easier Identification Of Fuel System Settings On Most Truck Engines{7557}
1980/11/24 New Aftercooler Core Has Copper-Nickel Tubes For Increased Strength{1063,1064}
1980/11/24 Use Fluid-Type Vibration Damper To Control Vibrations{1205,3305}
1980/11/24 New Gasket Improves Operation Of Shut-Off Groups{7418,7403}
1980/11/24 6V4008 Valve Seat Extractor Now Available{1103,0622}
1980/11/24 Replacement Wheel Available For Service Of 6V97 Engine Stand Group{0626}
1980/12/01 Direct Inquiry Service Information Retrieval System (SIRS) Available To U.S. And Canadian Dealers{0374}
1980/12/01 Exhaust Manifold And Air Lines Groups Changed To Prevent Exhaust Leakage And Damage To Manifold Gaskets And Mounting Studs{1059,1061}
1980/12/01 Larger Plug Used In The Ends Of The Rocker Arm Shaft Assembly{1102}
1980/12/01 New Service Handle Kit Permits Cab Door To Be Opened From Inside While Locked (Fastened With Lock){7308,7301}
1980/12/01 New Front Housing Assembly And Gaskets Used{1162,1166,1151}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.