Two Replacement Lights Available For 5P7277 Voltage Tester{0651}
Usage:
The No. 1829 light used in the 5P7277 Voltage Tester is not in the Caterpillar parts system. Other lights are available from Caterpillar for replacement of the No. 1829 Light.
It is Caterpillar's recommendation that an 8D1429 Bulb (No. 1820) be used as a replacement for the No. 1829 Light. The 8D1429 Bulb uses a little more current than the No. 1829 Light, but there is no difference in its performance.
The 5D1708 Bulb also can be used as a replacement for the No. 1829 Light, but uses more than two times the amount of current the No. 1829 Ligth uses. The 5D1708 Bulb must be used only if an 8D1429 Bulb is not available.
Caterpillar Information System:
1980/11/03 FT1514 Lubrication Manifold Permits Lubricant To Be Added To The Output Shaft Bearings Without Removal Of Rear Cover From Fuel Injection Test Bench{0652}
1980/11/03 Pulley With Keyway Can Be Used When Replacement Alternator Is Installed{1405}
1980/11/03 Check Valve Added To Hydramechanical Shut-Off{7418,1286,1307}
1980/11/03 Modification Of Puller Bolt Prevents Thread Damage During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1980/11/03 Kysor Air-Operated Shutdown Actuators For 3406, 3408, 1693 Truck Engines{7400,1265}
1980/10/27 Take A Little Time: Check The "Supplements" Section Regularly For Important Information About Existing Publications{0374}
1980/10/27 5P9733 Adapter Group Is Available To Test Hydramechanical Shut-Off Groups{7418,7403,7407,7410}
1980/10/27 A Group Of Special Instructions On The Subject Of Alignment Is Currently Available{0374,1000}
1980/10/20 Before You Use Any Service Publication, Make Sure It's Current{0374}
1980/10/20 Crankshaft Now Has A Fillet Radius At Front Main Bearing Journal{1202}
1980/10/20 Pressure Relief Fitting Added To Fan Drive Hub For More Positive Lubrication Of Front Bearing{1359}
1980/10/20 List Of Correct Fuel Injection Nozzle Assemblies To Use For Different Engine Applications{1254}
1980/11/03 FT1523 Fuel Oil System With External Filter Is Available{0652}
1980/11/03 Spider And Bearing Assembly Must Be Correctly Installed In Drive Shaft-To-Power Control Box Universal Joint{5234,5204,5201}
1980/11/10 Double-Check Those Dimensions{0374}
1980/11/10 Special Tools Available To Tighten Retainer Nuts For Clutch Drive Hubs Of 7211 And 7221 Marine Transmissions{0612,0626,3302}
1980/11/10 6V3147 Main Bearing Wrench Now Available{1203,0612}
1980/11/17 Improved Cable Assembly For Mechanical Shut-Off Group{7418}
1980/11/17 Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed{1315,1302}
1980/11/17 Coolant Conditioner Elements Are Now Available For 3208 Engines{1350}
1980/11/17 Two Thinner Spacers Available For Use During Adjustment Of Off-Engine Timing Dimension{1251,0653}
1980/11/17 6V4021 Piston Ring Compressor Group Available{1215,1214,0622}
1980/11/17 Tee-Test Plug And Pressure Tap (Connection) Plugs Can Be Tightened To A Higher Torque To Prevent Leaks{5050,0651}
1980/11/17 Use Dust Cap To Prevent Freon Leakage From Air Conditioner; Cap Is Available As Replacement Part{7320}