PRODUCT SUPPORT PROGRAM FOR ACTIVATING THE FUEL FILTER SWITCHES ON CERTAIN D6N SERIES III TRACK-TYPE TRACTORS
Usage:
REBE2188-00
Show/hide table
| 09Jul2007 |
U-308
A-250
D-260
O-280
Show/hide table
| Before/After | PRODUCT SUPPORT PROGRAM FOR ACTIVATING THE FUEL FILTER SWITCHES ON CERTAIN D6N SERIES III TRACK-TYPE TRACTORS |
|
| 1261 | PS42450 |
|
Show/hide table
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS42450" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Jul2009 |
PROBLEM
Show/hide table
| The fuel filter switches may not have been activated on certain D6N Series III Track-Type Tractors. The switches need to be activated to enable the fuel filters plugging monitoring strategy. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| D6N LGP | DJY00128-00361 |
| D6N XL | DJA00236-00337 |
PARTS NEEDED
Show/hide table
| No parts needed for this program |
ACTION REQUIRED
Show/hide table
| Enter ET to activate the fuel switches diagnostic under the engine ECM configuration tool. Change the value for both fuel filter switches from 17 to 88 with ET 2007A or prior versions. Refer to Image 1. Change the value for both fuel filter switches from Normally Opened to Normally Closed with ET 2007B. Refer to Image 2. |
Show/hide table
|
| Image1 |
|
| Image2 |
SERVICE CLAIM ALLOWANCES
Show/hide table
0-24 mo |
||||||
Show/hide table
| NOTE: This is a 0.5-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE TILT CAB LOCKING PLATES AND TIGHTENING THE ROPS BOLTS ON CERTAIN 953D AND 963D TRACK TYPE LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE TILT CAB LOCKING PLATES AND TIGHTENING THE ROPS BOLTS ON CERTAIN 953D AND 963D TRACK TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR GUARDS ON CERTAIN 994F WHEEL LOADERS AND 797B OFF HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR GUARDS ON CERTAIN 994F WHEEL LOADERS AND 797B OFF HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE HEATER AND AIR CONDITIONER SYSTEM ON CERTAIN 904B COMPACT WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE HEATER AND AIR CONDITIONER SYSTEM ON CERTAIN 904B COMPACT WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING 8N7005 INJECTORS FROM DEALER PARTS STOCK THAT ARE NOT PACKAGED IN THE PROPER CATERPILLAR PACKAGE AND CATERPILLAR LABEL PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING 8N7005 INJECTORS FROM DEALER PARTS STOCK THAT ARE NOT PACKAGED IN THE PROPER CATERPILLAR PACKAGE AND CATERPILLAR LABEL
PRODUCT SUPPORT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN C18 INDUSTRIAL ENGINES, AD55/AD45 UNDERGROUND ARTICULATED TRUCKS, AND PM-201 COLD PLANERS PRODUCT SUPPORT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN C18 INDUSTRIAL ENGINES, AD55/AD45 UNDERGROUND ARTICULATED TRUCKS, AND PM-201 COLD PLANERS
PRODUCT SUPPORT PROGRAM FOR UPDATING D6R SERIES III FOR COMPATIBILITY WITH THE LATEST VERSION OF ENGINE, POWER TRAIN AND ELECTRONIC MONITORING SYSTEM III (EMS III) SOFTWARE PRODUCT SUPPORT PROGRAM FOR UPDATING D6R SERIES III FOR COMPATIBILITY WITH THE LATEST VERSION OF ENGINE, POWER TRAIN AND ELECTRONIC MONITORING SYSTEM III (EMS III) SOFTWARE
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED CENTER TREAD IDLERS ON CERTAIN D6N TRACK-TYPE TRACTORS EQUIPPED WITH SYSTEMONE UNDERCARRIAGE PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED CENTER TREAD IDLERS ON CERTAIN D6N TRACK-TYPE TRACTORS EQUIPPED WITH SYSTEMONE UNDERCARRIAGE
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POTENTIALLY REPLACING THE ALTERNATOR CABLES ON CERTAIN D7R II TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POTENTIALLY REPLACING THE ALTERNATOR CABLES ON CERTAIN D7R II TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT CYLINDER ON CERTAIN 938G SERIES II WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT CYLINDER ON CERTAIN 938G SERIES II WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 252-6945 MOUNTING GROUP FOR THE CD550 ACCUGRADE DISPLAY ON CERTAIN D6R AND D7R TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 252-6945 MOUNTING GROUP FOR THE CD550 ACCUGRADE DISPLAY ON CERTAIN D6R AND D7R TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING DRAFT FRAME HARNESS ON CERTAIN 657G WHEEL TRACTOR-SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING DRAFT FRAME HARNESS ON CERTAIN 657G WHEEL TRACTOR-SCRAPERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ELBOW ASSEMBLY FOR THE AIR LINES GROUP ON CERTAIN 973C TRACK LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ELBOW ASSEMBLY FOR THE AIR LINES GROUP ON CERTAIN 973C TRACK LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING THE GRAPPLE ROTATOR FOR PUSHER HOLES ON CERTAIN 525C WHEEL SKIDDERS PRODUCT SUPPORT PROGRAM FOR INSPECTING THE GRAPPLE ROTATOR FOR PUSHER HOLES ON CERTAIN 525C WHEEL SKIDDERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE HIGH SPEED OIL CHANGE GROUP (QUICK EVAC) ON CERTAIN D6K TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE HIGH SPEED OIL CHANGE GROUP (QUICK EVAC) ON CERTAIN D6K TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE WIRING HARNESS FOR THE HEATED MIRROR ATTACHMENT ON CERTAIN 950H, 962H, 966H, 972H, 980G SERIES II, AND 980H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE WIRING HARNESS FOR THE HEATED MIRROR ATTACHMENT ON CERTAIN 950H, 962H, 966H, 972H, 980G SERIES II, AND 980H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND IF NECESSARY REPLACING THE TILT CYLINDER HOSE ASSEMBLY ON CERTAIN 988G AND 988H WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND IF NECESSARY REPLACING THE TILT CYLINDER HOSE ASSEMBLY ON CERTAIN 988G AND 988H WHEEL LOADERS
REPLACEMENT OF THE AIR CONDITIONING FAN ASSEMBLIES FOR SMALL TRACK-TYPE TRACTORS REPLACEMENT OF THE AIR CONDITIONING FAN ASSEMBLIES FOR SMALL TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR INSPECTING THE TONG PINS ON CERTAIN 525C, 535C, AND 545C WHEEL SKIDDERS PRODUCT SUPPORT PROGRAM FOR INSPECTING THE TONG PINS ON CERTAIN 525C, 535C, AND 545C WHEEL SKIDDERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 252-6209 SUPPORT ASSEMBLY ON CERTAIN 657G WHEEL TRACTOR-SCRAPERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 252-6209 SUPPORT ASSEMBLY ON CERTAIN 657G WHEEL TRACTOR-SCRAPERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN HANDLE CONTROL GROUPS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN HANDLE CONTROL GROUPS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE POWER TRAIN SOFTWARE ON CERTAIN 994F WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE POWER TRAIN SOFTWARE ON CERTAIN 994F WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING SOFTWARE ON CERTAIN 950H AND 962H WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING SOFTWARE ON CERTAIN 950H AND 962H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE AIR CLEANER BRACKETS ON CERTAIN 994F WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE AIR CLEANER BRACKETS ON CERTAIN 994F WHEEL LOADERS