PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED CENTER TREAD IDLERS ON CERTAIN D6N TRACK-TYPE TRACTORS EQUIPPED WITH SYSTEMONE UNDERCARRIAGE
Usage:
REBE2138-00
Show/hide table
| 27Aug2007 |
U-416
A-342
D-342
O-367
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED CENTER TREAD IDLERS ON CERTAIN D6N TRACK-TYPE TRACTORS EQUIPPED WITH SYSTEMONE UNDERCARRIAGE |
|
| 4159 | PS51348 |
|
Show/hide table
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS51348" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Aug2008 |
PROBLEM
Show/hide table
| The existing center tread idlers can fail on certain D6N Track-Type Tractors. These failures may include excessive bearing wear, leaking oil, or hot running idlers |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| D6N LGP | ALR00799-00800 ALY02905-03251 CCG00415-00430 CCS00407-00411 |
| D6N XL | AKM02357-02529 ALH00892-00897 CBF00343-00347 CBL00406-00413 CCK00795-00846 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 2900737 | IDLER GP-TRACK |
ACTION REQUIRED
Show/hide table
| Refer to the Service Manual as required to replace a failed 227-8825 Center Tread Idler with a new 290-0737 Center Tread Idler. This program only applies to failed idler/idlers on the affected product listed when they are equipped with SystemOne Undercarriage. A failure of the 227-8825 Center Tread Idler must be due to a leaking seal, excessive bearing wear, or be a hot running idler to qualify for this program. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
Show/hide table
| NOTE: This is a 5.0-hour job | ||||||
| Labor Hours Reimbursement: This is a 5.0-hour job to separate and connect the track and replace one idler. If required, an additional 1.0 hour will be allowed to replace the second idler on the same side. A maximum of 12.0 hours will be allowed to replace all four idlers. |
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POTENTIALLY REPLACING THE ALTERNATOR CABLES ON CERTAIN D7R II TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POTENTIALLY REPLACING THE ALTERNATOR CABLES ON CERTAIN D7R II TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT CYLINDER ON CERTAIN 938G SERIES II WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT CYLINDER ON CERTAIN 938G SERIES II WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 252-6945 MOUNTING GROUP FOR THE CD550 ACCUGRADE DISPLAY ON CERTAIN D6R AND D7R TRACK-TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 252-6945 MOUNTING GROUP FOR THE CD550 ACCUGRADE DISPLAY ON CERTAIN D6R AND D7R TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING DRAFT FRAME HARNESS ON CERTAIN 657G WHEEL TRACTOR-SCRAPERS PRODUCT SUPPORT PROGRAM FOR REPLACING DRAFT FRAME HARNESS ON CERTAIN 657G WHEEL TRACTOR-SCRAPERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ELBOW ASSEMBLY FOR THE AIR LINES GROUP ON CERTAIN 973C TRACK LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ELBOW ASSEMBLY FOR THE AIR LINES GROUP ON CERTAIN 973C TRACK LOADERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING VALVE SPRINGS AND ROTOCOILS ON CERTAIN 3500BHD MACHINE ENGINES PRODUCT SUPPORT PROGRAM FOR INSPECTING VALVE SPRINGS AND ROTOCOILS ON CERTAIN 3500BHD MACHINE ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING FUEL LEVEL SENDER ON CERTAIN 924G, 924GZ, 928G, 928GZ, 930G SMALL WHEEL LOADERS, AND IT28G INTEGRATED TOOL CARRIERS PRODUCT SUPPORT PROGRAM FOR INSTALLING FUEL LEVEL SENDER ON CERTAIN 924G, 924GZ, 928G, 928GZ, 930G SMALL WHEEL LOADERS, AND IT28G INTEGRATED TOOL CARRIERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW HYDRAULIC LINES ACROSS THE HITCH ON CERTAIN 930G SMALL WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW HYDRAULIC LINES ACROSS THE HITCH ON CERTAIN 930G SMALL WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE HYDRAULIC FAN ON D9T TRACK-TYPE TRACTORS EQUIPPED WITH WASTE HANDLING OR WOODCHIP ARRANGEMENTS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE HYDRAULIC FAN ON D9T TRACK-TYPE TRACTORS EQUIPPED WITH WASTE HANDLING OR WOODCHIP ARRANGEMENTS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING, AND IF NECESSARY REPLACING, THE 179-2203 OUTER BOLTS OF THE SWING GEAR BEARING ON CERTAIN 365B, 365B SERIES II, AND 365C EXCAVATORS THAT ARE CONFIGURED FOR MATERIAL HANDLING, ULTRA HIGH DEMOLITION OR OEMS A PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING, AND IF NECESSARY REPLACING, THE 179-2203 OUTER BOLTS OF THE SWING GEAR BEARING ON CERTAIN 365B, 365B SERIES II, AND 365C EXCAVATORS THAT ARE CONFIGURED FOR MATERIAL HANDLING, ULTRA HIGH DEMOLITION OR OEMS A
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 214-4863 ROTARY POSITION SENSORS FOR THE FINGER TIP CONTROL AND SERVICE BRAKE PEDAL ON D11R TRACK-TYPE TRACTORS, PART STOCK ACTION NEEDED INDEPENDENT OF DEALER MACHINE POPULATION, DEALER PARTS STOCK SOLD PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 214-4863 ROTARY POSITION SENSORS FOR THE FINGER TIP CONTROL AND SERVICE BRAKE PEDAL ON D11R TRACK-TYPE TRACTORS, PART STOCK ACTION NEEDED INDEPENDENT OF DEALER MACHINE POPULATION, DEALER PARTS STOCK SOLD
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE AIR HOSE CLAMP ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE AIR HOSE CLAMP ON CERTAIN 966H AND 972H MEDIUM WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR UPDATING D6R SERIES III FOR COMPATIBILITY WITH THE LATEST VERSION OF ENGINE, POWER TRAIN AND ELECTRONIC MONITORING SYSTEM III (EMS III) SOFTWARE PRODUCT SUPPORT PROGRAM FOR UPDATING D6R SERIES III FOR COMPATIBILITY WITH THE LATEST VERSION OF ENGINE, POWER TRAIN AND ELECTRONIC MONITORING SYSTEM III (EMS III) SOFTWARE
PRODUCT SUPPORT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN C18 INDUSTRIAL ENGINES, AD55/AD45 UNDERGROUND ARTICULATED TRUCKS, AND PM-201 COLD PLANERS PRODUCT SUPPORT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN C18 INDUSTRIAL ENGINES, AD55/AD45 UNDERGROUND ARTICULATED TRUCKS, AND PM-201 COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING 8N7005 INJECTORS FROM DEALER PARTS STOCK THAT ARE NOT PACKAGED IN THE PROPER CATERPILLAR PACKAGE AND CATERPILLAR LABEL PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING 8N7005 INJECTORS FROM DEALER PARTS STOCK THAT ARE NOT PACKAGED IN THE PROPER CATERPILLAR PACKAGE AND CATERPILLAR LABEL
PRODUCT SUPPORT PROGRAM FOR REWORKING THE HEATER AND AIR CONDITIONER SYSTEM ON CERTAIN 904B COMPACT WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE HEATER AND AIR CONDITIONER SYSTEM ON CERTAIN 904B COMPACT WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR GUARDS ON CERTAIN 994F WHEEL LOADERS AND 797B OFF HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR GUARDS ON CERTAIN 994F WHEEL LOADERS AND 797B OFF HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE TILT CAB LOCKING PLATES AND TIGHTENING THE ROPS BOLTS ON CERTAIN 953D AND 963D TRACK TYPE LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE TILT CAB LOCKING PLATES AND TIGHTENING THE ROPS BOLTS ON CERTAIN 953D AND 963D TRACK TYPE LOADERS
PRODUCT SUPPORT PROGRAM FOR ACTIVATING THE FUEL FILTER SWITCHES ON CERTAIN D6N SERIES III TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR ACTIVATING THE FUEL FILTER SWITCHES ON CERTAIN D6N SERIES III TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSPECTING THE GRAPPLE ROTATOR FOR PUSHER HOLES ON CERTAIN 525C WHEEL SKIDDERS PRODUCT SUPPORT PROGRAM FOR INSPECTING THE GRAPPLE ROTATOR FOR PUSHER HOLES ON CERTAIN 525C WHEEL SKIDDERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE HIGH SPEED OIL CHANGE GROUP (QUICK EVAC) ON CERTAIN D6K TRACK-TYPE TRACTORS PRODUCT SUPPORT PROGRAM FOR REWORKING THE HIGH SPEED OIL CHANGE GROUP (QUICK EVAC) ON CERTAIN D6K TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE WIRING HARNESS FOR THE HEATED MIRROR ATTACHMENT ON CERTAIN 950H, 962H, 966H, 972H, 980G SERIES II, AND 980H WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE WIRING HARNESS FOR THE HEATED MIRROR ATTACHMENT ON CERTAIN 950H, 962H, 966H, 972H, 980G SERIES II, AND 980H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND IF NECESSARY REPLACING THE TILT CYLINDER HOSE ASSEMBLY ON CERTAIN 988G AND 988H WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND IF NECESSARY REPLACING THE TILT CYLINDER HOSE ASSEMBLY ON CERTAIN 988G AND 988H WHEEL LOADERS
REPLACEMENT OF THE AIR CONDITIONING FAN ASSEMBLIES FOR SMALL TRACK-TYPE TRACTORS REPLACEMENT OF THE AIR CONDITIONING FAN ASSEMBLIES FOR SMALL TRACK-TYPE TRACTORS