Illustration 1 | g06359419 |
Cat® Data Link is an input and an output of the Brake ECM and is connected to the ECM at connector J1-10 and J1-20.
Cat Data Link has the following features or performs the following functions:
- Communicates with other electronic control modules through the machine harness.
- Not a visible component.
- Consists of internal ECM circuits and the connecting harness wiring.
- Allows the ECM to receive and send information.
- Bidirectional.
Caterpillar Electronic Technician (Cat ET) Service Tool also communicates with other ECM modules through Cat Data Link. Cat ET will list the other ECM modules and the available diagnostic information.
Description Of The Data That Is Transmitted Across The Data Link |
Device ID Code |
Application Date Code |
System Diagnostic Codes |
System Event Codes |
Actual Transmission Gear |
Desired Transmission Gear |
Vehicle Identification Code |
System Battery Voltage |
TCS Mode Status |
Status Of The Rear Differential Oil Filter |
Status Of The Rear Differential Oil Level |
Status Of The Fan Solenoid For The Rear Differential |
Status Of The TCS Right Brake Solenoid |
Status Of The TCS Proportional Solenoid Valve |
Throttle Position |
Status Of The Manual Retarder |
Status Of The ARC Pressure Switch |
Status Of The ARC Solenoid |
Status Of The ARC System Test |
Status Of The Rear Brake Oil Filter Switch |
Status Of The Oil Filter Switch For The Parking Brake |
Rear Differential Oil Temperature |
Rear Differential Oil Pressure |
Parking Brake Switch Status |
Status Of The Service Brake Switch |
Cycle Data For The ARC Solenoid |
Cycle Data For The Supply Valve Of The ARC |
Status Of The Low Fan Solenoid For The Rear Differential |
Left Brake Retract Pressure |
Right Brake Retract Pressure |
Note: All electronic control modules (ECMs) that use the data link have a module identifier (MID). The MID numbers are listed for each module:
Brake Control ... 116
Transmission Control ... 081
Chassis Control ... 087
Engine Control ... 036
Primary Steering Control ... 150
VIMS Main Module ... 049
VIMS Application Module ... 057
Advisor Control ... 053