Valve Covers
Usage:
Remove Valve Covers
1. Remove the fumes disposal tube (1) (left front and right rear valve covers only).
2. Remove the valve cover mounting bolts (2). Remove the valve cover.
Install Valve Covers
1. Install a new valve cover seal if necessary.
NOTE: When installing new seal, cut the seal to provide a minimum of 1" (2,54 mm) overlap.
2. Position the valve cover on engine, and install mounting bolts.
3. Install fumes disposal tube (left front and right rear valve covers only).
Caterpillar Information System:
D349 INDUSTRIAL & MARINE ENGINES Turbochargers
D349 INDUSTRIAL & MARINE ENGINES Turbocharger Heat Shield
D349 INDUSTRIAL & MARINE ENGINES Water Cooled Exhaust Manifolds
D349 INDUSTRIAL & MARINE ENGINES Exhaust Manifolds
D349 INDUSTRIAL & MARINE ENGINES Air Cleaner Housings
D349 INDUSTRIAL & MARINE ENGINES Aftercooler Cores
D349 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump Housing
D349 INDUSTRIAL & MARINE ENGINES Fuel Inj. Pump Housing & Governor
D349 INDUSTRIAL & MARINE ENGINES Fuel Injection Lines
D349 INDUSTRIAL & MARINE ENGINES Aftercooler Housings
D349 INDUSTRIAL & MARINE ENGINES Variable Timing Unit
D349 INDUSTRIAL & MARINE ENGINES Governor
D349 INDUSTRIAL & MARINE ENGINES Fuel Injection Valves
D349 INDUSTRIAL & MARINE ENGINES Precombustion Chambers
D349 INDUSTRIAL & MARINE ENGINES Right Front Camshaft Housing
D349 INDUSTRIAL & MARINE ENGINES Right Rear Camshaft Housing
D349 INDUSTRIAL & MARINE ENGINES Left Front Camshaft Housing
D349 INDUSTRIAL & MARINE ENGINES Left Rear Camshaft Housing
D349 INDUSTRIAL & MARINE ENGINES Right Front Cylinder Head Assembly
D349 INDUSTRIAL & MARINE ENGINES Right Front Or Left Front Cylinder Head Assembly (Alternate Method)
D349 INDUSTRIAL & MARINE ENGINES Right Rear Cylinder Head Assembly
D349 INDUSTRIAL & MARINE ENGINES Right Rear Or Left Rear Cylinder Head Assembly (Alternate Method)
D349 INDUSTRIAL & MARINE ENGINES Left Front Cylinder Head Assembly
D349 INDUSTRIAL & MARINE ENGINES Spacer Plates