Gear Group (Rear) - PTO
Show/hide table
Illustration 1 | g00336418 |
(1) Adapter assembly
(2) Apply 5P-3413 Pipe Sealant to the bolt.
(2) (3) Torque for the bolts ... 135 ± 15 N·m (100 ± 11 lb ft)
(4) Lubricate the seal lightly with the lubricant that is being sealed.
Note: End clearance 0.13 to 0.89 mm (.005 to .035 inch)
Show/hide table
Illustration 2 | g00336419 |
Section view of the adapter assembly |
(5) Maximum distance for the extension of the dowel from the adapter ... 3.5 mm (.14 inch)
(6) Distance for the extension of the bearing from the adapter ... 3.1 ± 0.5 mm (.12 ± .02 inch)
Caterpillar Information System:
3618 Engine Engine Speed Governing
Removal And Installation Of The Hydraulic Electronic Unit Injectors{1290} Removal And Installation Of The Hydraulic Electronic Unit Injectors{1290}
3408B and 3412C Generator Set Engines Fuel System
3500B Locomotive Engines Air Cleaner Adapter
3612 and 3616 Fast Vessel Engines Fuel System Secondary Filter - Replace
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Emergency Stopping
Air Conditioning and Heating R134a for All Caterpillar Machines Glossary of Terms
3618 Engine Water Temperature Regulator - Replace
3618 Engine Overhaul (Major)
3618 Engine Overhaul (Top End)
3618 Engine Governor Actuator Linkage - Check
3618 Engine Exhaust Shields - Inspect
3500B Locomotive Engines Auxiliary Drive Coupling
3306B Industrial Engine Ether Atomizers
3306C Truck Engine Shutoff Pivot Lever
3618 Engine Engine Oil and Filter - Change
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Engine Oil Pressure Sensor
3512B Engine and SPF343, SPS343 and SPT343 Pumpers Fuel Pressure Sensor
3306C Engines for Caterpillar Built Machines Engine Trunnion
3618 Engine Before Starting Engine
3306C Truck Engine Flywheel
3618 Engine After Starting Engine
3618 Engine Starting the Engine
3306C Truck Engine Flywheel