Exhaust Shields - Inspect
Show/hide table
 |
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool. |
 |
Show/hide table
| NOTICE |
|---|
The insulation for the exhaust system can be damaged if work is performed on the insulation or around the insulation. Do not tear the surface of the insulation. A torn surface will allow the insulation to absorb flammable liquids and a fire can result from engine heat. Remove the insulation or protect the insulation before performing work on the insulation or around the insulation. Handle the insulation carefully. |
Ensure that the exhaust manifold is cool. Inspect the insulation for the exhaust system. Replace any insulation that is damaged. Consult your Caterpillar dealer for assistance.
Caterpillar Information System:
3618 Engine Engine Protective Devices - Check
Installation Of The 0R-2554 Cylinder Block And The 0R-3258 Cylinder Block {1201} Installation Of The 0R-2554 Cylinder Block And The 0R-3258 Cylinder Block {1201}
3618 Engine Engine Oil Level - Check
3618 Engine Barring Device - Lubricate
3208 Marine Engine Aftercooler Core - Clean/Test
3408B and 3412C Generator Set Engines Troubleshooting
3306C Engines for Caterpillar Built Machines Engine Oil Pump
3618 Engine Centrifugal Oil Filter - Inspect
3306C Truck Engine Flywheel Housing
3618 Engine Centrifugal Oil Filter - Clean
Installation Of The 0R-3611 Cylinder Block {1201} Installation Of The 0R-3611 Cylinder Block {1201}
3618 Engine Product Description
3618 Engine Governor Actuator Linkage - Check
3618 Engine Overhaul (Top End)
3618 Engine Overhaul (Major)
3618 Engine Water Temperature Regulator - Replace
Air Conditioning and Heating R134a for All Caterpillar Machines Glossary of Terms
3408C, 3412, 3412C, and 3412D High Performance Marine Engines Emergency Stopping
3612 and 3616 Fast Vessel Engines Fuel System Secondary Filter - Replace
3500B Locomotive Engines Air Cleaner Adapter
3408B and 3412C Generator Set Engines Fuel System
Removal And Installation Of The Hydraulic Electronic Unit Injectors{1290} Removal And Installation Of The Hydraulic Electronic Unit Injectors{1290}
3618 Engine Engine Speed Governing
3306C Truck Engine Gear Group (Rear) - PTO