Diesel engine exhaust contains products of combustion which may cause personal injury. Always start and operate the engine in a well ventilated area, and, if in an enclosed area, vent the exhaust to the outside. |
Personal injury can result from rotating and moving parts. Stay clear of all rotating and moving parts. Never attempt adjustments while the machine is moving or the engine is running unless otherwise specified. The machine must be parked on a level surface and the engine stopped. Attach a "Do Not Operate" or similar warning tag to the start switch and controls before servicing, repairing, or making adjustments to the machine. |
Personal injury or death can result from sudden machine movement. Sudden movement of the machine can cause injury to persons on or near the machine. To prevent injury or death, make sure that the area around the machine is clear of personnel and obstructions before operating the machine. |
Illustration 1 | g03888017 |
Required Tools | ||||
---|---|---|---|---|
Tool | Item | Qty | Part No | Description |
A | 1 | Laptop Computer with Plus+1TM Software | ||
B | 466-6258 | Communication Adapter Gp | ||
B1 | 1 | 317-7485 | Communication Adapter | |
B2 | 1 | 370-4617 | Cable As | |
B3 | 1 | 457-6114 | Cable As |
- Drive the machine to a smooth, horizontal surface. Make sure that the machine is not articulated.
Show/hide table
Illustration 2 g06108868 - Move propel lever (1) to the NEUTRAL position.
- Move parking brake switch (2) to the ON position.
Show/hide table
Illustration 3 g06108976 - Use throttle control switch (3) to operate the engine in ECO mode or in low idle.
Note: Two things indicate when the engine is in ECO mode. First, "ECO" will appear on the display. Second, the second LED next to throttle control switch (3) will be illuminated. Two things indicate when the engine is at low idle. First "Low Idle" will appear on the display. Second, the first LED next to the throttle control switch will be illuminated.
Show/hide tableIllustration 4 g06108978 - Move engine start switch (4) to the OFF position.
Show/hide table
Illustration 5 g06112174 - Connect Tool (B3) to diagnostic connector (5). Connect Tool (B2) to USB port on Tool (A).
- Move engine start switch (4) to the ON position.
Show/hide table
Illustration 6 g03883819 - Click Plus+1TM icon (6) to launch the Plus+1TM program on Tool (E).
Note: The connection instruction for the Plus+1TM service tool for Caterpillar® is published in Special Instruction, REHS7696. , "Software Installation Instructions of the Plus+1TM Service Tool for Caterpillar® (P1STC) Is available for Caterpillar Paving Products".
Show/hide tableIllustration 7 g06112178 - Click "Open Folder" icon (7) or "Open Folder" icon (8) to access the diagnostic files.
Show/hide table
Illustration 8 g03888540 - Select "CAT Diagnostic Files" folder (9). Click "Open" button (10).
Show/hide table
Illustration 9 g06112214 - Select "CCS9 T4fWB" file (11) then click "Open" button (12).
Note: The machine-specific diagnostic P1D file must be used with the P1STC program to communicate with the machine ECM.
Show/hide tableIllustration 10 g06114472 - Select the "Configuration" icon (13).
Show/hide table
Illustration 11 g03888514 - Select the "Vibratory System" (14).
Show/hide table
Illustration 12 g03888524 - The default setting is 35 percent.
- Select the increase or decrease arrows (15) to select your value of engagement.
Show/hide table
Illustration 13 g03888529 - Select "Save" (16).
- Close Plus+1TM.
- Disconnect Tool (B3) from diagnostic connector (5). Disconnect Tool (B2) from USB port on Tool (A).
- Move engine start switch (4) to the OFF position.