Electric Starting Motor - Remove and Install
Start By:
- Connect the Steering Frame Lock.
Show/hide table
 |
|
Accidental machine starting can cause injury or death to personnel working on the machine. To avoid accidental machine starting, turn the battery disconnect switch to the OFF position and remove the key. If the machine is not equipped with a battery disconnect switch, disconnect the battery cables from the battery and tape the battery clamps. Place a do not operate tag at the battery disconnect switch location to inform personnel that the machine is being worked on. |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| |
| Illustration 1 | g06114220 |
Show/hide table
| |
| Illustration 2 | g06114222 |
Show/hide table
| |
| Illustration 3 | g06114250 |
Show/hide table
| |
| Illustration 4 | g06114258 |
- Install the electric starting motor in the reverse order of removal.
Caterpillar Information System:
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Electronic Control (Hydraulic System)
320D2 FM Forestry Machine Machine Systems Boom Bearings and Seals - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Counterbalance Valve - Remove and Install - Steering Valve
986K Wheel Loader Hydraulic System Oil Filter (Hydraulic Fan Return) - Replace
CB2.5, CB2.7, CB2.9 and CC2.6 Vibratory Utility Compactors Propel System Case Drain Flow for Piston Motor (Wheel Propel) - Test
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Seat Belt - Inspect
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Rim - Inspect
Installation Procedure for Cat® Health Onboard System on Certain Cat Machines {7605, 7610, 7620} Installation Procedure for Cat® Health Onboard System on Certain Cat Machines {7605, 7610, 7620}
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Differential and Final Drive Oil Filter - Replace
986K Wheel Loader Axle Oscillation Bearings - Lubricate
PM620 and PM622 Cold Planer Machine Systems Hydraulic Cylinder - Remove and Install - Guide Ski
D8T Track-Type Tractor Undercarriage - Clean
Improved Database Procedure Is Now Available for Certain Cat® MineStar System {7605, 7610, 7620} Improved Database Procedure Is Now Available for Certain Cat® MineStar System {7605, 7610, 7620}
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Leaving the Machine
3516E Engines for Caterpillar Built Machines Crankshaft Front Seal and Wear Sleeve - Remove and Install
New Stroke Limiter Collars Are Available for 16M, 16M3, 18M3, and 24M Motor Graders {5223} New Stroke Limiter Collars Are Available for 16M, 16M3, 18M3, and 24M Motor Graders {5223}
988K XE Wheel Loader Machine Systems Ride Control Accumulator - Disassemble
986K Wheel Loader Hydraulic Tank Breaker Relief Valve - Clean
988K XE Wheel Loader Machine Systems Ride Control Accumulator - Assemble
New Monitor Software is Now Used on Certain 415F2 and 427F2 Backhoe Loaders {108U, 1901, 7490, 7600, 7610, 7620} New Monitor Software is Now Used on Certain 415F2 and 427F2 Backhoe Loaders {108U, 1901, 7490, 7600, 7610, 7620}
986K Wheel Loader Hydraulic System Oil Level - Check
CCS9 Combination Vibratory Compactor Propel Systems Propel Control (Auto Vibe Control) - Calibrate
D7E Track-Type Tractor Undercarriage - Clean
CCS9 Combination Vibratory Compactor Propel Systems Flushing Valve (Axle Propel Motor, Drum Propel Motor) - Test and Replace