1. Home
  2. Caterpillar
  3. Operation and Maintenance Manual
  4. #i06786909

422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Caterpillar


Leaving the Machine

Usage:

426 F2 DJ4

  • Parkirlah pada permukaan yang rata. Jika harus memarkir pada bidang miring, pasang ganjal pada alat berat.

  • Pasang rem servis untuk menghentikan alat berat. Pindahkan tuas kontrol transmisi ke posisi NETRAL.

  • Gerakkan tuas kontrol kecepatan ke posisi KECEPATAN IDLE RENDAH.

  • Aktifkan rem parkir.

  • Aktifkan pengunci netral transmisi.

  • Turunkan semua work tool ke permukaan tanah.

  • Putar kunci sakelar start engine ke posisi OFF.

  • Gerakkan semua tuas kontrol hidraulik maju dan mundur untuk melepas tekanan hidraulik.

  • Gerakkan semua tuas kontrol hidraulik ke posisi TAHAN.

    Catatan: Rujuk ke langkah 10 hingga 14 untuk alat berat terkontrol pilot.

  • Putar kunci sakelar start engine ke posisi OFF selama 4 detik. Putar kunci sakelar start engine kembali ke posisi ON.

  • Tempatkan sakelar penguncian hidraulik ke posisi TIDAK TERKUNCI.

  • Gerakkan semua tuas kontrol hidraulik maju dan mundur untuk melepas tekanan hidraulik.

  • Gerakkan semua tuas kontrol hidraulik ke posisi TAHAN.

  • Putar sakelar start engine ke posisi OFF.

  • Cabut kunci sakelar start engine.

    Ini akan mencegah orang yang tidak berkepentingan menyalakan engine atau menghidupkan lampu.

  • Saat Anda keluar dari alat berat, tutup jendela dan kunci pintu kabin, bila terpasang.

  • Pasang semua kunci pelindung dari kejahatan dan semua penutup kejahatan, bila terpasang.
    Show/hide table
    Ilustrasi 1g00037860

  • Gunakan tangga dan tempat berpegangan sewaktu turun dari alat berat. Menghadaplah ke arah alat berat dan gunakan kedua tangan. Pastikan bahwa tangga tidak kotor sebelum Anda turun.

  • Pastikan semua lampu dimatikan.

    Pelindung Terhadap Kejahatan (Bila Terpasang)

    Show/hide table
    Ilustrasi 2g03406495

    Pelindung kejahatan disimpan dalam kotak penyimpanan kiri saat tidak digunakan. Pelindung sesuai dengan kontrol operator. Kunci pelindung kejahatan pada tempatnya menggunakan kunci.

    Catatan: Pelindung harus selalu dikunci bila alat berat tidak digunakan atau akan disimpan.

    • Caterpillar Information System:

    Improved Database Procedure Is Now Available for Certain Cat® MineStar System {7605, 7610, 7620} Improved Database Procedure Is Now Available for Certain Cat® MineStar System {7605, 7610, 7620}
    3516E Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
    R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Electronic Control (Hydraulic System)
    320D2 FM Forestry Machine Machine Systems Boom Bearings and Seals - Remove and Install
    PM820, PM822, and PM825 Cold Planer Machine Systems Counterbalance Valve - Remove and Install - Steering Valve
    986K Wheel Loader Hydraulic System Oil Filter (Hydraulic Fan Return) - Replace
    CB2.5, CB2.7, CB2.9 and CC2.6 Vibratory Utility Compactors Propel System Case Drain Flow for Piston Motor (Wheel Propel) - Test
    797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Seat Belt - Inspect
    797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Rim - Inspect
    Installation Procedure for Cat® Health Onboard System on Certain Cat Machines {7605, 7610, 7620} Installation Procedure for Cat® Health Onboard System on Certain Cat Machines {7605, 7610, 7620}
    797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Differential and Final Drive Oil Filter - Replace
    986K Wheel Loader Axle Oscillation Bearings - Lubricate
    3516E Engines for Caterpillar Built Machines Crankshaft Front Seal and Wear Sleeve - Remove and Install
    New Stroke Limiter Collars Are Available for 16M, 16M3, 18M3, and 24M Motor Graders {5223} New Stroke Limiter Collars Are Available for 16M, 16M3, 18M3, and 24M Motor Graders {5223}
    988K XE Wheel Loader Machine Systems Ride Control Accumulator - Disassemble
    986K Wheel Loader Hydraulic Tank Breaker Relief Valve - Clean
    988K XE Wheel Loader Machine Systems Ride Control Accumulator - Assemble
    New Monitor Software is Now Used on Certain 415F2 and 427F2 Backhoe Loaders {108U, 1901, 7490, 7600, 7610, 7620} New Monitor Software is Now Used on Certain 415F2 and 427F2 Backhoe Loaders {108U, 1901, 7490, 7600, 7610, 7620}
    986K Wheel Loader Hydraulic System Oil Level - Check
    CCS9 Combination Vibratory Compactor Propel Systems Propel Control (Auto Vibe Control) - Calibrate
    D7E Track-Type Tractor Undercarriage - Clean
    CCS9 Combination Vibratory Compactor Propel Systems Flushing Valve (Axle Propel Motor, Drum Propel Motor) - Test and Replace
    CCS9 Combination Vibratory Compactor Propel Systems Machine Preparation for Troubleshooting
    CCS9 Combination Vibratory Compactor Propel Systems Visual Inspection
    Back to top
    Contacts My AVS
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.