New Monitor Software is Now Used on Certain 415F2 and 427F2 Backhoe Loaders {108U, 1901, 7490, 7600, 7610, 7620}
- Backhoe Loader
- 415F2 (S/N: HWA1-332)
- 427F2 (S/N: HWK1-221)
Description Of Change: When the C3.4 engine is installed on 415F2 and 427F2 Backhoe Loaders, a forced regeneration may need to be performed. A light on the console indicates the need for the regeneration. The Operation and Maintenance Manual dictates the steps to perform the forced regeneration using the service menus in the display. However, a software issue does not allow the operator to perform the regeneration. The new software will allow forced regeneration.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Show/hide table
| Required Parts | |||
|---|---|---|---|
| Qty | Part Number | Description | Former Part Number |
| 1 | 498-0762 | Monitor Software Gp | |
Caterpillar Information System:
988K XE Wheel Loader Machine Systems Ride Control Accumulator - Assemble
986K Wheel Loader Hydraulic Tank Breaker Relief Valve - Clean
988K XE Wheel Loader Machine Systems Ride Control Accumulator - Disassemble
New Stroke Limiter Collars Are Available for 16M, 16M3, 18M3, and 24M Motor Graders {5223} New Stroke Limiter Collars Are Available for 16M, 16M3, 18M3, and 24M Motor Graders {5223}
3516E Engines for Caterpillar Built Machines Crankshaft Front Seal and Wear Sleeve - Remove and Install
422F2, 426F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Leaving the Machine
Improved Database Procedure Is Now Available for Certain Cat® MineStar System {7605, 7610, 7620} Improved Database Procedure Is Now Available for Certain Cat® MineStar System {7605, 7610, 7620}
3516E Engines for Caterpillar Built Machines Electric Starting Motor - Remove and Install
R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Electronic Control (Hydraulic System)
320D2 FM Forestry Machine Machine Systems Boom Bearings and Seals - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Counterbalance Valve - Remove and Install - Steering Valve
986K Wheel Loader Hydraulic System Oil Filter (Hydraulic Fan Return) - Replace
986K Wheel Loader Hydraulic System Oil Level - Check
CCS9 Combination Vibratory Compactor Propel Systems Propel Control (Auto Vibe Control) - Calibrate
D7E Track-Type Tractor Undercarriage - Clean
CCS9 Combination Vibratory Compactor Propel Systems Flushing Valve (Axle Propel Motor, Drum Propel Motor) - Test and Replace
CCS9 Combination Vibratory Compactor Propel Systems Machine Preparation for Troubleshooting
CCS9 Combination Vibratory Compactor Propel Systems Visual Inspection
CCS9 Combination Vibratory Compactor Propel Systems Propel System Troubleshooting
Improved Fuel Injectors Are Now Used on Certain C7 and C9 Machine Engines {1251, 1254, 1290, 1713} Improved Fuel Injectors Are Now Used on Certain C7 and C9 Machine Engines {1251, 1254, 1290, 1713}
986K Wheel Loader Hydraulic System Oil Sample - Obtain
M318F, M320F and M322F Wheeled Excavators and MH3022, MH3024 and MH3026 Material Handlers Restricted Visibility
986K Wheel Loader Transmission Oil Filter - Replace
CB2.5, CB2.7, CB2.9 and CC2.6 Vibratory Utility Compactors Machine Systems Machine Preparation for Troubleshooting