PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER TURBINE OUTLET BELLOWS ON CERTAIN 3512C LOCOMOTIVE ENGINES
Usage:
TEBE0926-00
Show/hide table
| 19Nov2014 |
U-685
A-510
D-603
O-595
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER TURBINE OUTLET BELLOWS ON CERTAIN 3512C LOCOMOTIVE ENGINES |
|
| 1059 1061 | PS52819 |
|
Show/hide table
| NOTE: | Caterpillar’s obligations under this Service Letter are subject to, and shall not apply in contravention of, the laws, rules, regulations, directives, ordinances, orders, or statutes of the United States, or of any other applicable jurisdiction, without recourse or liability with respect to Caterpillar. |
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS52819" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 30Nov2016 |
PROBLEM
Show/hide table
| The existing bellows can leak on certain 3512C Locomotive Engines. If the existing bellows fails it can/will result in an exhaust leak. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 3512C | NJT00102-00231 |
| 3512C HD | F2X00100-00311 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 12 | 9L2295 | BOLT-HEX HEAD |
| 2 | 2631174 | CLAMP-V-BAND |
| 2 | 2790487 | GASKET |
| 2 | 4499633 | BELLOWS AS |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 2% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
||
ACTION REQUIRED
Show/hide table
| Remove the failed bellow and install the new bellows. Tighten the nuts on the clamps to a torque of 14 +/- 1 N.m (124 +/- 9 lb in). Lightly tap around the diameter of the clamps with a soft hammer. Tighten the nuts again to a torque of 14 +/- 1 N.m (124 +/- 9 lb in). |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-100 mo |
||||||
Show/hide table
| NOTE: This is a 2.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST BYPASS GASKET ON CERTAIN 3516C MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST BYPASS GASKET ON CERTAIN 3516C MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOLENOID ON CERTAIN C27 PETROLEUM ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE SOLENOID ON CERTAIN C27 PETROLEUM ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE 9S-4183 PLUG ON CERTAIN C32 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING THE 9S-4183 PLUG ON CERTAIN C32 MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE SOFTWARE ON CERTAIN 3512C PETROLEUM ENGINES, AND SPF343C PUMPERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ENGINE SOFTWARE ON CERTAIN 3512C PETROLEUM ENGINES, AND SPF343C PUMPERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST COOLER (NRS) ON CERTAIN C7.1 INDUSTRIAL ENGINES AND GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST COOLER (NRS) ON CERTAIN C7.1 INDUSTRIAL ENGINES AND GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A SEA WATER PLUG ON CERTAIN C18 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING A SEA WATER PLUG ON CERTAIN C18 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RATING LABEL ON CERTAIN C4.4, C6.6, C15, C18 AND 3512C GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE RATING LABEL ON CERTAIN C4.4, C6.6, C15, C18 AND 3512C GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL FILTER ELEMENTS ON CERTAIN C175-16, C175-20 GENERATOR SETS AND LOCOMOTIVE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL FILTER ELEMENTS ON CERTAIN C175-16, C175-20 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 205-2922 V-BELTS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 205-2922 V-BELTS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL SUMP PAN ON CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL SUMP PAN ON CERTAIN C32 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CRANKCASE PRESSURE INDICATOR HOSE ON CERTAIN C32 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CRANKCASE PRESSURE INDICATOR HOSE ON CERTAIN C32 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR CORRECTING THE ENGINE RATING ON CERTAIN C15 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR CORRECTING THE ENGINE RATING ON CERTAIN C15 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE INSTRUMENT HARNESS ON CERTAIN C6.6 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE INSTRUMENT HARNESS ON CERTAIN C6.6 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN PISTON SKIRTS FROM DEALER PARTS STOCK AND INSPECTING AND POSSIBLY REWORKING CERTAIN 3456 AND C-16 CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING CERTAIN PISTON SKIRTS FROM DEALER PARTS STOCK AND INSPECTING AND POSSIBLY REWORKING CERTAIN 3456 AND C-16 CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7E-0329 VALVE COVER BASES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7E-0329 VALVE COVER BASES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 444-6557 SUPPORT ASSEMBLIES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 444-6557 SUPPORT ASSEMBLIES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON PACKS AND POSSIBLY REPLACING THE OIL SUMP PAN ON CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON PACKS AND POSSIBLY REPLACING THE OIL SUMP PAN ON CERTAIN C32 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN C13 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN C13 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FILTER BYPASS SWITCH GP ON CERTAIN TH55-E70 AND TH55-E90 TRANSMISSIONS AND 3512C ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE FILTER BYPASS SWITCH GP ON CERTAIN TH55-E70 AND TH55-E90 TRANSMISSIONS AND 3512C ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 107-7330 OR 230-2520 CONNECTING ROD BEARINGS ON CERTAIN 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C GENERATOR SETS, PM3512B, AND PM3516 POWER MODULES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 107-7330 OR 230-2520 CONNECTING ROD BEARINGS ON CERTAIN 3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, AND 3516C GENERATOR SETS, PM3512B, AND PM3516 POWER MODULES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY RELOCATING POWER CABLES ON CERTAIN 4-WIRE UPS 250, AND UPS 500G UNINTERRUPTIBLE POWER SUPPLIES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY RELOCATING POWER CABLES ON CERTAIN 4-WIRE UPS 250, AND UPS 500G UNINTERRUPTIBLE POWER SUPPLIES
PRODUCT SUPPORT PROGRAM FOR INSPECTING, REWORKING, OR POSSIBLY REPLACING THE HIGH PRESSURE FUEL PUMP ON CERTAIN C175-16 LOCOMOTIVE ENGINES AND C175-16 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR INSPECTING, REWORKING, OR POSSIBLY REPLACING THE HIGH PRESSURE FUEL PUMP ON CERTAIN C175-16 LOCOMOTIVE ENGINES AND C175-16 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEA WATER PUMP ASSEMBLY ON CERTAIN 3056, C1.5, C2.2, C4.4, AND C6.6 MARINE ENGINE PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEA WATER PUMP ASSEMBLY ON CERTAIN 3056, C1.5, C2.2, C4.4, AND C6.6 MARINE ENGINE
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE ENCLOSURE DUCT GROUP ON CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR INSTALLING THE ENCLOSURE DUCT GROUP ON CERTAIN C32 GENERATOR SETS