Modulating Valve (Transmission Clutch)
Show/hide table
Illustration 1 | g01283942 |
(1) Torque for final installation of the nut ... 14 ± 1.5 N·m (10 ± 1 lb ft)
(2) Torque for installing the nipple assembly ... 14 ± 4 N·m (10 ± 3 lb ft)
(3) 226-9622 Coil
- Minimum temperature for operation ... −40 °C (−40.0 °F)
- Maximum temperature for operation with the maximum input current ... 121 °C (250.0 °F)
- Nominal coil voltage ... 24 VDC
- Nominal coil resistance at 25°C (77°F) ... 8.7 ± 0.4 Ohms
- Maximum input current at the maximum temperature for operation 121 °C (250.0 °F) ... 1 Ampere
- Maximum temperature for operation with the maximum input current ... 121 °C (250.0 °F)
Show/hide table
Illustration 2 | g01283943 |
(4) Torque for installing the cartridge assembly ... 50 ± 5 N·m (37 ± 4 lb ft)
(5) Lubricate the O-ring with a minimal amount of the lubricant that is being sealed.
(6) Torque for installing the seat ... 10 ± 2 N·m (7.4 ± 1.5 lb ft)
(7) Apply 4C-9507 Retaining Compound to threads.
(8) 118-3731 Spring
- Length under test force ... 14.00 mm (.551 inch)
- Test force ... 36.0 ± 1.8 N (8.10 ± .40 lb)
- Free length after test ... 15.99 mm (.630 inch)
- Outside diameter ... 12.1 mm (.48 inch)
- Test force ... 36.0 ± 1.8 N (8.10 ± .40 lb)
Flow of SAE 30 oil at 1000 kPa (145 psi) pressure drop ... 65 L/min (17 US gpm)
Caterpillar Information System:
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS Truck Payload System Maximum Payload Speed Manager
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS Truck Payload System Truck Payload - Calibrate
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS Truck Payload System Truck Payload - Configure
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS Truck Payload System Payload Management Guidelines
Installing the 258-2472 Cab Window Kit {7310} Installing the 258-2472 Cab Window Kit {7310}
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS Truck Payload System Features
Filtration Procedure for 5000 Series Front Shovel, Mass Excavator, 6015B Hydraulic Mining Shovel, and MH3037 Material Handler Hydraulic Oil {0680, 0768, 5050, 5056} Filtration Procedure for 5000 Series Front Shovel, Mass Excavator, 6015B Hydraulic Mining Shovel, and MH3037 Material Handler Hydraulic Oil {0680, 0768, 5050, 5056}
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS Truck Payload System Component Description
TH580B Telehandler Hydraulic System Accumulator
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System Position Sensor (Steering Cylinder) - Set
AccuGrade® Site Reference System (SRS) and Laser Reference System (LRS) Shutdown (Laser Reference System)
RM-300 Reclaimer Mixer Machine Systems Rotor Drive Differential - Assemble
New Radios Extend Beyond the Face of the Console{7338} New Radios Extend Beyond the Face of the Console{7338}
C175-16 and C175-20 Generator Set Engines Fuel Lines
CB-334E, CB-334E XW, CB-335E, CB34 and CB34 XW and CC34 Vibratory Utility Compactor Systems Radiator and Hydraulic Oil Cooler
2006/06/26 Correction to Testing and Adjusting , "Torque Converter Stall - Test" {3101}
Field Service for Positive Pin Retention 2 (PPR 2) {4169, 4170, 4171, 4174, 4175, 4180} Field Service for Positive Pin Retention 2 (PPR 2) {4169, 4170, 4171, 4174, 4175, 4180}
C175-16 Engine for 795F Series AC Off-Highway Trucks Flywheel Housing - Type 1
D6K Track-Type Tractor Power Train Piston Pump (Hydrostatic) - Disassemble - Left Side
D6K Track-Type Tractor Power Train Piston Pump (Hydrostatic) - Assemble - Left Side
D6K Track-Type Tractor Power Train Piston Pump (Hydrostatic) - Disassemble - Right Side
D6K Track-Type Tractor Power Train Piston Pump (Hydrostatic) - Assemble - Right Side
Field Installation of the 258-8355 Backhoe Auxiliary Lines Gp (One-Way Lines Kit) for 416E Backhoes with an Extendable Stick{5057} Field Installation of the 258-8355 Backhoe Auxiliary Lines Gp (One-Way Lines Kit) for 416E Backhoes with an Extendable Stick{5057}
Inspection and Repair Procedure to Replace the Studs for the Rocker Arm Shaft{1102} Inspection and Repair Procedure to Replace the Studs for the Rocker Arm Shaft{1102}