Correction to Testing and Adjusting , "Torque Converter Stall - Test" {3101}
- Integrated Toolcarrier:
- IT62H (S/N: M5G1-UP)
- Wheel Loader:
- 950H (S/N: N1A1-UP; M1G1-UP; J5J1-UP; K5K1-UP)
- 962H (S/N: N4A1-UP; M3G1-UP; J6J1-UP; K6K1-UP)
- 966H (S/N: A6D1-UP; A6G1-UP; A6J1-UP)
- 972H (S/N: A7D1-UP; A7G1-UP; A7J1-UP)
The information in these articles is incorrect. Remove the following information from these articles.
- Set the hydraulic fan to the maximum rpm. In order to run the hydraulic fan system at the maximum rpm, the connection to the electrohydraulic control valve for the hydraulic fan system must be disconnected.
Note: The electrohydraulic control valve is located on the right side of the engine and below the hydraulic fan pump. Turn the key start switch to the OFF position. Disconnect the electrical connection from the connection (1) on the electrohydraulic control valve.
Show/hide table
 | |
| Illustration 1 | g00819655 |
Electrohydraulic Control Valve | |
Caterpillar Information System:
CB-334E, CB-334E XW, CB-335E, CB34 and CB34 XW and CC34 Vibratory Utility Compactor Systems Radiator and Hydraulic Oil Cooler
C175-16 and C175-20 Generator Set Engines Fuel Lines
New Radios Extend Beyond the Face of the Console{7338} New Radios Extend Beyond the Face of the Console{7338}
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Power Train Modulating Valve (Transmission Clutch)
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS Truck Payload System Maximum Payload Speed Manager
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS Truck Payload System Truck Payload - Calibrate
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS Truck Payload System Truck Payload - Configure
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS Truck Payload System Payload Management Guidelines
Installing the 258-2472 Cab Window Kit {7310} Installing the 258-2472 Cab Window Kit {7310}
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS Truck Payload System Features
Filtration Procedure for 5000 Series Front Shovel, Mass Excavator, 6015B Hydraulic Mining Shovel, and MH3037 Material Handler Hydraulic Oil {0680, 0768, 5050, 5056} Filtration Procedure for 5000 Series Front Shovel, Mass Excavator, 6015B Hydraulic Mining Shovel, and MH3037 Material Handler Hydraulic Oil {0680, 0768, 5050, 5056}
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS Truck Payload System Component Description
Field Service for Positive Pin Retention 2 (PPR 2) {4169, 4170, 4171, 4174, 4175, 4180} Field Service for Positive Pin Retention 2 (PPR 2) {4169, 4170, 4171, 4174, 4175, 4180}
C175-16 Engine for 795F Series AC Off-Highway Trucks Flywheel Housing - Type 1
D6K Track-Type Tractor Power Train Piston Pump (Hydrostatic) - Disassemble - Left Side
D6K Track-Type Tractor Power Train Piston Pump (Hydrostatic) - Assemble - Left Side
D6K Track-Type Tractor Power Train Piston Pump (Hydrostatic) - Disassemble - Right Side
D6K Track-Type Tractor Power Train Piston Pump (Hydrostatic) - Assemble - Right Side
Field Installation of the 258-8355 Backhoe Auxiliary Lines Gp (One-Way Lines Kit) for 416E Backhoes with an Extendable Stick{5057} Field Installation of the 258-8355 Backhoe Auxiliary Lines Gp (One-Way Lines Kit) for 416E Backhoes with an Extendable Stick{5057}
Inspection and Repair Procedure to Replace the Studs for the Rocker Arm Shaft{1102} Inspection and Repair Procedure to Replace the Studs for the Rocker Arm Shaft{1102}
572R Series II Pipelayer Power Train Oil Filter (Power Train)
2006/08/07 The Shaft Assembly for the Drawbar Assembly Has Been Updated {6153}
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System Electronic Control Module (ECM) - Replace
3176C Engines for Caterpillar Built Machines Sensors and Electrical Connectors