 | |
| Illustration 1 | g01122967 |
(1) Use a 251-9614 Shim Kit, as required.
Thickness of the shim ... 0.1000 mm (0.0039 inch)
Thickness of the shim ... 0.2000 mm (0.0079 inch)
Thickness of the shim ... 0.4000 mm (0.0157 inch)
(2) Use a 191-4441 Shim Kit, as required.
Thickness of the shim ... 0.2000 mm (0.0079 inch)
Thickness of the shim ... 0.3000 mm (0.0118 inch)
Thickness of the shim ... 0.5000 mm (0.0197 inch)
Type ... Planetary gear reducer (two-speed) with integral braking system
High gear ratio ... 33.66:1
Low gear ratio ... 119.51:1
Minimum shift pressure ... 2000 kPa (290 psi)
Maximum shift pressure ... 10410 kPa (1510 psi)
Full brake release pressure ... 3000 kPa (435 psi)
Maximum brake pressure ... 20000 kPa (2900 psi)
Maximum input speed ... 3800 rpm
(3) Wheel Nut Torque Procedure
 | |
| Illustration 2 | g03100477 |
- Cross pattern torquing required for all passes.
- First pass 450 N·m (332 lb ft)
- Second pass 560 ± 60 N·m (413 ± 44 lb ft)
- Tension and run belt.
- Static test torque to 476 N·m (351 lb ft) on a minimum of six nuts.