Stabilizer - Remove
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 1P-1863 | Retaining Ring Pliers | 1 |
- Lower stabilizer assembly (1).
Show/hide table
Illustration 2 g01122850 Show/hide tableIllustration 3 g01122851 Show/hide tableIllustration 4 g01122852 - Remove all mounting hardware from harness assembly (4) and hose assemblies (2) and (3).
Show/hide table
Illustration 5 g01122855 - Attach a suitable lifting device to stabilizing cylinder (6). The weight of stabilizing cylinder (6) is approximately
91 kg (200 lb) . Use Tooling (A) in order to remove retaining ring (5). Remove pin (7).Show/hide tableIllustration 6 g01122857 - Position stabilizing cylinder (6) onto suitable blocking and secure stabilizing cylinder (6).
Show/hide table
Illustration 7 g01122858 - Attach a suitable lifting device to stabilizer assembly (1). The weight of stabilizer assembly (1) is approximately
125 kg (275 lb) . Remove bolt (8). Remove pin assembly (9). Remove stabilizer assembly (1).Show/hide tableIllustration 8 g01122861 - Remove seals (10) and bearings (11). Repeat for the remaining seals and bearings.
Show/hide table
Illustration 9 g01122869 - Attach a suitable lifting device to stabilizer assembly (1). Use Tooling (A) in order to remove retaining ring (12). Remove pin (14). Raise stabilizer assembly (1) from pad assembly (13).
- Repeat Step 1 through Step 7 for the opposite side.
Show/hide table
Illustration 1 | g01122848 |
Caterpillar Information System:
2004/11/22 A New Gas Spring is Available for The Large Soil Compactors {0635}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Window Washer Reservoir - Fill
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Transmission Oil Level - Check
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Ether Starting Aid Cylinder - Replace - If Equipped
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Engine Oil Sample - Obtain
Asphalt Pavers Burner Electronic Control System Flame No Longer Detected
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Connector Contact Description
Asphalt Pavers Burner Electronic Control System Flame Not Detected
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Material Height Sensor - Test
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Water Temperature Regulator - Remove and Install
TH210 and TH215 Telehandlers Radiator Core - Clean
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Unit Injector Hydraulic Pump - Install
Assembly Procedure for the Mine Specific Design Truck Body{7258, 7960} Assembly Procedure for the Mine Specific Design Truck Body{7258, 7960}
TH580B Telehandler Machine Systems Stabilizer - Install
2005/02/07 New Hardware Improves the Service Life of the O-ring Seals in the Torque Converter {3101}
834H Wheel Dozer and 836H Landfill Compactor Additional Messages
Asphalt Pavers Burner Electronic Control System Flame Detected when Not Expected
Refrigerant Compressor Functional Test for All Caterpillar Machines{1802} Refrigerant Compressor Functional Test for All Caterpillar Machines{1802}
TH580B Telehandler Machine Systems Stabilizer Cylinder - Remove and Install
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Braking System Foot Brake Control
AP-1055D and BG-2455D Asphalt Pavers Propel System Final Drive Planetary (Mobil-Trac)
Asphalt Pavers Burner Electronic Control System Temperature Not High Enough
AP-1055D and BG-2455D Asphalt Pavers Propel System Track Roller Frame (Mobil-Trac)
Asphalt Pavers Burner Electronic Control System CID - - -