Stabilizer - Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 1P-1863 | Retaining Ring Pliers | 1 |
B | 123-3804 | Adapter | 1 |
9U-6832 | Nut | 1 | |
4C-9634 | Puller Stud | 1 | |
6V-3175 | Double Acting Cylinder | 1 | |
3S-6224 | Electric Hydraulic Pump Gp | 1 | |
C | 1P-0510 | Driver Gp | 1 |
- Attach a suitable lifting device to stabilizer assembly (1) and position stabilizer assembly (1) into pad assembly (13). The weight of stabilizer assembly (1) is approximately
125 kg (275 lb) . Install pin (14). Use Tooling (A) in order to install retaining ring (12).Show/hide tableIllustration 2 g01122861 Show/hide tableIllustration 3 g01123307 - Use Tooling (B) in order to install bearings (11). Use Tooling (C) (not shown) in order to install seals (10). Repeat for the remaining seals and bearings.
Note: Install bearings (11) so that bearings (11) are flush against the lip that is inside the bore.
Show/hide tableIllustration 4 g01122858 - Attach a suitable lifting device to stabilizer assembly (1) and position stabilizer assembly (1). Install pin assembly (9) and bolt (8).
Show/hide table
Illustration 5 g01122857 Show/hide tableIllustration 6 g01122855 - Attach a suitable lifting device to stabilizing cylinder (6) and remove stabilizing cylinder (6) from the suitable blocking. Position stabilizing cylinder (6). The weight of stabilizing cylinder (6) is approximately
91 kg (200 lb) . Install pin (7). Use Tooling (A) in order to install retaining ring (5).Show/hide tableIllustration 7 g01122852 Show/hide tableIllustration 8 g01122851 Show/hide tableIllustration 9 g01122850 - Install all mounting hardware to hose assemblies (2) and (3) and harness assembly (4).
- Repeat Step 1 through Step 5 for the opposite side.
Show/hide table
Illustration 1 | g01122869 |
Caterpillar Information System:
Assembly Procedure for the Mine Specific Design Truck Body{7258, 7960} Assembly Procedure for the Mine Specific Design Truck Body{7258, 7960}
TH580B Telehandler Machine Systems Stabilizer - Remove
2004/11/22 A New Gas Spring is Available for The Large Soil Compactors {0635}
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Window Washer Reservoir - Fill
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Transmission Oil Level - Check
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Ether Starting Aid Cylinder - Replace - If Equipped
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Engine Oil Sample - Obtain
Asphalt Pavers Burner Electronic Control System Flame No Longer Detected
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Connector Contact Description
Asphalt Pavers Burner Electronic Control System Flame Not Detected
AP-1000D, AP-1055D, AP-655C, BG-2255C, BG-2455D and BG-260D Asphalt Pavers Material Height Sensor - Test
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Water Temperature Regulator - Remove and Install
2005/02/07 New Hardware Improves the Service Life of the O-ring Seals in the Torque Converter {3101}
834H Wheel Dozer and 836H Landfill Compactor Additional Messages
Asphalt Pavers Burner Electronic Control System Flame Detected when Not Expected
Refrigerant Compressor Functional Test for All Caterpillar Machines{1802} Refrigerant Compressor Functional Test for All Caterpillar Machines{1802}
TH580B Telehandler Machine Systems Stabilizer Cylinder - Remove and Install
824H Wheel Dozer, 825H Soil Compactor and 826H Landfill Compactor Braking System Foot Brake Control
AP-1055D and BG-2455D Asphalt Pavers Propel System Final Drive Planetary (Mobil-Trac)
Asphalt Pavers Burner Electronic Control System Temperature Not High Enough
AP-1055D and BG-2455D Asphalt Pavers Propel System Track Roller Frame (Mobil-Trac)
Asphalt Pavers Burner Electronic Control System CID - - -
C7 Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove
TH220B, TH330B and TH340B Telehandlers Machine Systems Hydraulic Tank