Usage:
1. Fasten a lifting sling and a hoist to the front lifting bracket.
2. Remove the bolts that hold the engine front support to the frame rails. Loosen the bolts that hold the engine rear support to the frame rail.
3. Use the hoist or and raise the front of the engine. The weight of the front of the engine is approximately 998 kg (2200 lb).
4. Remove eight bolts (1), and remove engine front support (2). The weight of the engine front support is approximately 32 kg (70 lb).
NOTE: The following steps are for installation of the engine front support.
5. Put engine front support (2) in position on the engine, and install eight bolts (1).
6. Lower the engine to the frame rails, and install the bolts that hold the engine front support to the frame rails. Tighten the bolts in the engine rear support.