Dipstick Assembly
Usage:
Remove & Install Dipstick Assembly
1. Remove bolt, nut, washer and spacer (1).
2. Remove bolt and washer (3).
3. Remove dipstick assembly (2).
4. Remove O-ring seal (4) from the dipstick assembly.
NOTE: For installation of the dipstick assembly, reverse the removal steps.
Caterpillar Information System:
3406C MARINE ENGINE Engine Lifting Brackets
3406C MARINE ENGINE Introduction
3408C & 3412C INDUSTRIAL ENGINES Testing & Adjusting
3408C & 3412C INDUSTRIAL ENGINES Systems Operation
3408C & 3412C INDUSTRIAL ENGINES Circuit Breaker
3408C & 3412C INDUSTRIAL ENGINES Switches
3408C & 3412C INDUSTRIAL ENGINES Sending Units
3408C & 3412C INDUSTRIAL ENGINES Indicators
3408C & 3412C INDUSTRIAL ENGINES Ammeter
3408C & 3412C INDUSTRIAL ENGINES Tachometer (Digital)
3408C & 3412C INDUSTRIAL ENGINES Tachometer Calibration Chart
3408C & 3412C INDUSTRIAL ENGINES Service Meter
3406C MARINE ENGINE Air Cleaner
3406C MARINE ENGINE Crankshaft Vibration Damper & Pulley
3406C MARINE ENGINE Engine Front Support
3406C MARINE ENGINE Engine Rear Support
3406C MARINE ENGINE Instrument Panel
3406C MARINE ENGINE Service Meter
3406C MARINE ENGINE Tachometer Drive
3406C MARINE ENGINE Electric Starting Motor
3406C MARINE ENGINE Sump Pump
3406C MARINE ENGINE Fuel Priming Pump
3406C MARINE ENGINE Fuel Filter Base
3406C MARINE ENGINE Raw Water Pump