3408C & 3412C INDUSTRIAL ENGINES Caterpillar


Switches

Usage:

Liquid Level

NOTE: Switch shown in high level position.

(1) Approximate liquid level when switch activitates ... 6.4 mm (.25 in)

Contact position is normally closed.

Temperature

2W8915

Terminal No. 1 is normally open below actuation temperature.

Terminal No. 2 is common.

Terminal No. 3 is normally closed below actuation temperature.

With a temperature increase of 98 ± 1.5°C (208 ± 2°F), terminal No. 1 closes and terminal No. 3 opens.

With a temperature increase of 91°C (196°F), terminal No. 1 opens and terminal No. 3 closes.

(1) Final torque for switch assembly ... 52 ± N·m (38 ± 6 lb ft)

7C9365

Terminal No. 1 is normally open below actuation temperature.

Terminal No. 2 is common.

Terminal No. 3 is normally closed below actuation temperature.

With a temperature increase of 107 ± 1.5°C (225 ± 2°F), terminal No. 1 closes and terminal No. 3 opens.

With a temperature increase of 100°C (212°F), terminal No. 1 opens and terminal No. 3 closes.

(1) Final torque for switch assembly ... 52 ± 8 N·m (38 ± 6 lb ft)

5N8857

Terminal A is normally open below actuation temperature.

Terminal B is common.

Terminal C is normally closed below actuation temperature.

With a temperature increase of 98 ± 1.5°C (208 ± 2°F), terminal A closes and terminal C opens.

With a temperature decrease of 91°C (196°F), terminal A opens and terminal C closes.

(1) Final torque for switch assembly ... 52 ± 8 N·m (38 ± 6 lb ft)

2W8916

Terminal A is normally open below actuation temperature.

Terminal B is common.

Terminal C is normally closed below actuation temperature.

With a temperature increase of 92 ± 1.5°C (198 ± 2°F), terminal A closes and terminal C opens.

With a temperature decrease of 85°C (185°F), terminal No. A opens and terminal C closes.

(1) Final torque for switch assembly ... 52 ± 8 N·m (38 ± 6 lb ft)

3N7442

Low Water Temperature Switch

Switch must open between ... 24 and 29°C (75 and 84°F)

Switch must close between ... 18 and 24°C (64 and 75°F)

8N1693 For Ether Aid

Switch must open between ... 35 and 41°C (95 and 106°F)

Switch must close ... 27°C (81°F min)

Final installation tighten screws to a torque of ... 1.7 ± 0.2 N·m (15 ± 2 lb in)

Final torque for switch assembly ... 40 ± 5 N·m (29 ± 4 lb ft)

Pressure

6T6652

When installing switch, tighten to a maximum of ... 40 ± 5 N·m (29 ± 4 lb ft)

Terminal No. 1 is common.

Terminal No. 2 is normally open below 103 kPa (15 psi).

Terminal No. 3 is normally closed below 103 kPa (15 psi).

With pressure increase, terminal No. 2 closes and terminal No. 3 opens at ... 158 ± 28 kPa (23 ± 4 psi)

With pressure decrease, terminal No. 2 opens and terminal No. 3 closes at ... 124 ± 21 kPa (18 ± 3 psi)

Temperature range (operating) ... -40 to 121°C (-40.0 to 250°F)

9X4276

When installing switch, tighten to a maximum of ... 40 ± 5 N·m (29 ± 4 lb ft)

Terminal No. 1 is common.

Terminal No. 2 is normally open below 48 kPa (7 psi).

Terminal No. 3 is normally closed below 48 kPa (7 psi).

With pressure increase, terminal No. 2 closes and terminal No. 3 opens at ... 93.0 ± 20.8 kPa (13.5 ± 3.0 psi)

With pressure decrease, terminal No. 2 opens and terminal No. 3 closes at ... 68.9 ± 20.8 kPa (10.0 ± 3.0 psi)

Temperature range (operating) ... -40 to 121°C (-40.0 to 250°F)

2L3402

Current rating:

24 volts DC ... 4A

32 volts DC ... 2A

With an increase in pressure, switch closes at ... 20.7 to 27.6 kPa (3 to 4 psi)

7N5946, For use with time delay and shutdown systems

Circuit 1: normally closed

Circuit 2: normally open

With an increase in pressure, circuit 1 opens and circuit 2 closes at ... 145 kPa (21 psi) max.

With a decrease in pressure, circuit 2 opens and circuit 1 closes at ... 75 ± 20 kPa (11 ± 3 psi)

3N7443, Alarm or Shutoff

With an increase of pressure, switch operates at ... 130 to 145 kPa (19 to 21 psi)

With a decrease of pressure, switch operates at ... 105 to 110 kPa (15 to 16 psi)

Starter Magnetic

Pull in voltage a 25° C ... 17 V

Current consumption (draw) both windings at 24V ... 0.82 ± 0.06 A

Type duty ... Intermittent

(1) Torque for large terminal nuts ... 3.6 ± 0.4 N·m (31 ± 4 lb in)

(2) Torque for small terminal nuts ... 1.7 ± 0.3 N·m (15 ± 3 lb in)

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.