Air Cleaner
Usage:
Remove & Install Air Cleaner
1. Remove three bolts (1).
2. Loosen hose clamp (2).
3. Remove three bolts (4), and remove air cleaner (3).
NOTE: The following steps are for installation of the air cleaner.
4. Put air cleaner (3) in position on the turbocharger and bracket.
5. Install three bolts (4) that hold the air cleaner to the bracket. Tighten bolts (4) to a torque of 25 ± 7 N·m (18 ± 5 lb ft).
6. Tighten hose clamp (2) to a torque of 4.5 ± 0.5 N·m (39.82 ± 4.42 lb in).
7. Install three bolts (1). Tighten bolts (1) to a torque of 25 ± 7 N·m (18 ± 5 lb ft).
Caterpillar Information System:
3406C MARINE ENGINE Dipstick Assembly
3406C MARINE ENGINE Engine Lifting Brackets
3406C MARINE ENGINE Introduction
3408C & 3412C INDUSTRIAL ENGINES Testing & Adjusting
3408C & 3412C INDUSTRIAL ENGINES Systems Operation
3408C & 3412C INDUSTRIAL ENGINES Circuit Breaker
3408C & 3412C INDUSTRIAL ENGINES Switches
3408C & 3412C INDUSTRIAL ENGINES Sending Units
3408C & 3412C INDUSTRIAL ENGINES Indicators
3408C & 3412C INDUSTRIAL ENGINES Ammeter
3408C & 3412C INDUSTRIAL ENGINES Tachometer (Digital)
3408C & 3412C INDUSTRIAL ENGINES Tachometer Calibration Chart
3406C MARINE ENGINE Crankshaft Vibration Damper & Pulley
3406C MARINE ENGINE Engine Front Support
3406C MARINE ENGINE Engine Rear Support
3406C MARINE ENGINE Instrument Panel
3406C MARINE ENGINE Service Meter
3406C MARINE ENGINE Tachometer Drive
3406C MARINE ENGINE Electric Starting Motor
3406C MARINE ENGINE Sump Pump
3406C MARINE ENGINE Fuel Priming Pump
3406C MARINE ENGINE Fuel Filter Base
3406C MARINE ENGINE Raw Water Pump
3406C MARINE ENGINE Accessory Drive