Sprocket - Remove and Install
Start By:
- Separate the track.
- Remove bolts (1) and sprocket (2).
Show/hide table
Illustration 1 | g01239433 |
- Position sprocket (2) and install bolts (1). Tighten bolts (1) to a torque of
170 ± 30 N·m (125 ± 22 lb ft) .
Show/hide table
Illustration 2 | g01239433 |
End By:
- Connect the track.
Caterpillar Information System:
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Front Idler and Recoil Spring - Remove
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Track Roller - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Track Carrier Roller - Remove and Install
Engine Replacement Procurement Instructions for Cat® Gaseous Generator Sets {1000} Engine Replacement Procurement Instructions for Cat® Gaseous Generator Sets {1000}
G3512 Generator Set Engine Engine Oil Cooler - Assemble
G3512 Generator Set Engine Engine Oil Cooler - Disassemble
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Hydraulic Track Adjusters - Remove
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Duo-Cone Conventional Seals - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Crankshaft Vibration Damper and Pulley - Remove and Install
New Oil Pan Gasket is Now Used on Certain C175 Engines {1302} New Oil Pan Gasket is Now Used on Certain C175 Engines {1302}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Crankshaft Front Seal - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Water Pump - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Final Drive and Travel Motor - Remove
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Swivel - Remove and Install
New Exhaust Spring is Now Used on Certain C18 Industrial Engines {1061} New Exhaust Spring is Now Used on Certain C18 Industrial Engines {1061}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Travel on Level Ground - Test
797F and 797F XQ Off-Highway Trucks Machine Systems Electronic Control Module (VIMS Main Module) - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Pedal Control and Mounting - Remove and Installl
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000} A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Camera - Remove and Install
C175 Petroleum Engine Oil Filter Differential Pressure Problem - If Equipped with the Self-Cleaning Oil Filter
C175 Petroleum Engine Oil Pressure Is Low
C175 Petroleum Engine Sensor Supply - Test