Fixed Axle (Front) - Install
- Fasten a suitable lifting sling to each side of the fixed axle, as shown. Fasten a hoist to both lifting slings. Raise the fixed axle into position. The weight of the fixed axle is
1225 kg (2700 lb) . - Install bolts (7). Tighten the bolts to a torque of
1800 ± 200 N·m (1320 ± 150 lb ft) . - Install plate (6) and bolts (5) to both sides of the fixed axle.
Show/hide table
Illustration 2 g00498600 - Put front drive shaft (3) in position in the differential and yoke (4). Install the straps and bolts (2). Tighten the bolts to a torque of
135 ± 15 N·m (100 ± 11 lb ft) . - Connect hose assembly (1) and the tube assembly to the fixed axle.
Note: Make sure that all mounting surfaces are clean prior to installation.
Show/hide table
Illustration 1 | g00498604 |
End By:
- Install the front tires and rims. Refer to Disassembly and Assembly, "Tire and Rim (Front) - Remove and Install".
- Purge the air from the braking system. Refer to Testing and Adjusting for the correct procedure.
Caterpillar Information System:
RM-350B Reclaimer/Mixer Power Train Battery and Battery Cable - Separate and Connect
3126B and 3126E On-highway Engines Injection Actuation Pressure - Test
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Fixed Axle (Front) - Remove
924H, 924HZ, 928HZ and 930H Wheel Loaders Power Train Brake and Planetary
RM-350B Road Reclaimer/Mixer Power Train Drive and Steering Axle
2007/08/20 C-12/3176C/3196 Front Housing Bolts {1151}
2002/05/06 Correction to Disassembly and Assembly , "Differential" {3258}
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Power Train Electrical Output Components
RM-350B Road Reclaimer/Mixer Power Train Pressure Switch (Service Brake)
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Tire and Rim (Rear) - Remove and Install
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Tire and Rim (Front) - Remove and Install
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Drive Shaft (Rear) - Remove and Install
14H and 16H Motor Graders Power Train Transmission Lubrication Oil Pressure - Test
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Oscillating Axle (Rear) - Remove
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Oscillating Axle (Rear) - Install
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Trunnion Support (Oscillating Axle, Front) - Remove and Install
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Trunnion Support (Oscillating Axle, Rear) - Remove and Install
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Service Brake - Remove
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Service Brake - Install
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders Power Train Features
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Differential and Bevel Gear - Disassemble
816F Landfill Compactor, 815F Soil Compactor and 814F Wheel Dozer Differential and Bevel Gear - Assemble
322C and 325C Forest Machines Hydraulic System Travel Hydraulic System
RM-350B Reclaimer/Mixer Machine Systems Counterbalance Valve (Rear Steering) - Test and Adjust