Power Train Guard (Transmission) - Remove and Install
Removal Procedure
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Position a suitable floor jack under front guard (2) .
Show/hide table
Illustration 1 | g00749809 |
- Remove bolts (1) .
- Use the floor jack to carefully remove front guard (1). The weight of front guard (2) is 23 kg (50 lb).
- Position a suitable floor jack under rear guard (4) .
Show/hide table
Illustration 2 | g00749811 |
- Remove bolts (3) .
- Use the floor jack to carefully remove rear guard (4). The weight of rear guard (4) is 34 kg (75 lb).
Installation Procedure
- Use a suitable floor jack to carefully install rear guard (4). The weight of rear guard is 34 kg (75 lb).
Show/hide table
Illustration 3 | g00749811 |
- Install bolts (3) that hold rear guard (4) to the frame.
- Use a suitable floor jack to carefully install front guard (1). The weight of front guard (2) is 23 kg (50 lb).
Show/hide table
Illustration 4 | g00749809 |
- Install bolts (1) that hold front guard (2) to the frame.
End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
PF-300B and PS-300B Pneumatic Compactors Propel System Transmission Mounting
JF Series Starting Motor Pinion Does Not Engage Ring Gear While Armature Turns
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Transmission (Direct Drive) - Disassemble
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Saw) - Remove
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Saw) - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Saw) - Disassemble
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Saw) - Assemble
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Feed Roller Arm) - Remove
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Feed Roller Arm) - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Feed Roller Arm) - Disassemble
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Feed Roller Arm) - Assemble
2000/08/07 A New Auger Chain Case Wear Plate Assembly Is Now Available {6631, 6820}
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Transmission and Torque Converter - Separate
TH103 Telehandler Braking System Service Brake - Adjust
JF Series Starting Motor Starting Motor Continues to Operate after Start Switch Has Been Released
TH62, TH63, TH82 and TH83 Telehandlers Power Train Differential Pinion Bearing - Adjust
2000/07/31 Revision to the Parts Manual for the R1600 LHD {3260, 3278}
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Torque Converter - Disassemble
2000/10/30 Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927}
TH62, TH63, TH82 and TH83 Telehandlers Braking System Service Brake - Adjust
JF Series Starting Motor Starting Motor Solenoid - Test
2000/08/07 A New Auger Chain Case Wear Plate Is Now Available {6631, 6820}
740 Articulated Truck, 768C, 769C, 769D, 772B, 773B, 773D, 773E, 773F, 776, 776B, 776C, 776D, 777, 777B, 777C, 777D, 777F, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C and 793D Off-Highway Trucks and 771C, 771D, 775B, 775 Speed Sensor
TH103 Telehandler Braking System Parking Brake Control Cable - Adjust