Lubrication Oil Pump (Saw) - Remove
Removal Procedure
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Disconnect hose (3) from pump (2).
Show/hide table
 | |
| Illustration 1 | g00421079 |
- Disconnect hose (1) from pump (2) .
- Remove the retaining nut from pump (2). The retaining nut is beneath the pump.
- Hold the pump shaft in order to prevent the shaft from falling out of the pump. Lift pump (2) off the harvester head.
Caterpillar Information System:
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Saw) - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Saw) - Disassemble
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Saw) - Assemble
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Feed Roller Arm) - Remove
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Feed Roller Arm) - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Feed Roller Arm) - Disassemble
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Feed Roller Arm) - Assemble
2000/08/07 A New Auger Chain Case Wear Plate Assembly Is Now Available {6631, 6820}
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Bank Valve (Main Hydraulic) - Remove
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Bank Valve (Main Hydraulic) - Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Bank Valve - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Bank Valve (Main Hydraulic) - Disassemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Transmission (Direct Drive) - Disassemble
JF Series Starting Motor Pinion Does Not Engage Ring Gear While Armature Turns
PF-300B and PS-300B Pneumatic Compactors Propel System Transmission Mounting
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Power Train Guard (Transmission) - Remove and Install
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Transmission and Torque Converter - Separate
TH103 Telehandler Braking System Service Brake - Adjust
JF Series Starting Motor Starting Motor Continues to Operate after Start Switch Has Been Released
TH62, TH63, TH82 and TH83 Telehandlers Power Train Differential Pinion Bearing - Adjust
2000/07/31 Revision to the Parts Manual for the R1600 LHD {3260, 3278}
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Torque Converter - Disassemble
2000/10/30 Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927}
TH62, TH63, TH82 and TH83 Telehandlers Braking System Service Brake - Adjust