Lubrication Oil Pump (Saw) - Install
Installation Procedure
- Hold the pump shaft while you install pump (2). The shaft can fall out of the pump during pump installation. Install pump (2) through the pump hole in the harvester head.
Show/hide table
Illustration 1 | g00421079 |
- Install the retaining nut on the pump cylinder.
- Connect hose (3). Connect hose (1) .
End By: Fill the oil tank with oil. Cycle the pump by hand. Cycle the pump until oil reaches the bar for the saw chain.
Caterpillar Information System:
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Saw) - Disassemble
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Saw) - Assemble
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Feed Roller Arm) - Remove
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Feed Roller Arm) - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Feed Roller Arm) - Disassemble
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Feed Roller Arm) - Assemble
2000/08/07 A New Auger Chain Case Wear Plate Assembly Is Now Available {6631, 6820}
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Bank Valve (Main Hydraulic) - Remove
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Bank Valve (Main Hydraulic) - Install
TH62, TH63, TH82, TH83 and TH103 Telehandlers Machine Systems Bank Valve - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Bank Valve (Main Hydraulic) - Disassemble
TH62, TH63, TH82 and TH83 Telehandlers Braking System Brake Cylinder (Master) - Test and Adjust
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Lubrication Oil Pump (Saw) - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train Transmission (Direct Drive) - Disassemble
JF Series Starting Motor Pinion Does Not Engage Ring Gear While Armature Turns
PF-300B and PS-300B Pneumatic Compactors Propel System Transmission Mounting
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Power Train Guard (Transmission) - Remove and Install
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Transmission and Torque Converter - Separate
TH103 Telehandler Braking System Service Brake - Adjust
JF Series Starting Motor Starting Motor Continues to Operate after Start Switch Has Been Released
TH62, TH63, TH82 and TH83 Telehandlers Power Train Differential Pinion Bearing - Adjust
2000/07/31 Revision to the Parts Manual for the R1600 LHD {3260, 3278}
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train Torque Converter - Disassemble
2000/10/30 Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927}