1998/05/04 Caterpillar

ROPS Instruction Film Available Through Parts Service{7177,7405}

Usage:

A 159-3759 ROPS Instruction Film (No Drill/No Weld) is available through parts service. The ROPS instruction film is a decal that should be applied to a visible area within the operators station of machines equipped with ROPS. The purpose of the ROPS instruction film is to inform that nothing should be attached to the ROPS without first referring to the Operation and Maintenance Manual for the applicable machine. The Operation and Maintenance Manual recommends that anyone who wishes to secure an attachment or make a modification to the ROPS should consult their Caterpillar Dealer. The Caterpillar Dealer will have access to the Special Instruction, SEHS6929; "Inspection, Maintenance, and Repair of Rollover Protective Structures (ROPS) and Attachment Installation Guidelines".

159-3759 ROPS Instruction Film

Caterpillar Information System:

1998/05/04 Improved Alternator Groups Now Available{1405}

1998/05/04 New Fans Improve Reliability Of The Air Conditioner Condenser Group{1805,7320}

1998/05/04 Correction To Service Manual Module, SENR6794-01, Specifications, 938G Wheel Loader And IT38G Integrated Toolcarrier Hydraulic System{0374,1386}

1998/05/04 Procedure For Adjusting Hood Side Panels{7251}

1998/05/04 New Custom Product Support Literature Is Available For 776D Tractors And 777D Off-Highway Trucks Equipped With 3Z-6435 Tachograph Arrangement (Factory/Field Installation){0374,7317}

1998/05/04 New Custom Product Support Literature Is Available For 773D And 775D Trucks Equipped With 3Z-6309 Engine Pre-Lubrication Group (Field Retrofit){0374,1469,1300}

1998/05/04 Load Piston Body Changes In ICM Pressure Control Valve Group{3073,3030}

1998/05/04 New Pumps For C-Series Backhoe Loaders{5070}

1998/05/04 Field Installation Of The CD Player{7338}

1998/05/04 Improved Final Drive Pinion Bearing Setting Procedure Used And New Shim Pack Kit Available{4050,4091}

1998/05/04 Procedure To Retrofit 1R-0762 "Radial Seal" Filter Assembly{1260,1262}

1998/05/04 New Coolant Level Sensor And Harness Assembly Improves Ground Path{1377,7470}

1998/05/04 Correction To 9C-8172 Brake & Planetary Group{0374,4011,4255}

1998/05/11 New Gear Assembly And Stub Shaft Used In Front Gear Group {1206}

1998/05/11 New Intermediate Cylinder In Hoist Cylinder Increases Clearance Between Rod And Head To Prevent Binding {5102}

1998/05/11 Weld Repair Procedure For Rear Upper Front Strut Mounting Plates {7050,7201}

1998/05/11 New Rock Ejector Assembly Reduces Tire Damage {7157}

1998/05/11 Service Intervals For RAYCOR Fuel Filter Group {1261,1250,1280}

1998/05/11 Supplement To Correct Bearing Cap Torque For Differential {3258}

1998/05/11 Supplement To "Improvements To Brake Caliper Seals Prevent Leaks In High Temperature Applications" {4256}

1998/05/11 Operation Of The Conveyor System In Manual Override {6631,5643}

1998/05/11 Corrections And Release Of Schematic {5050,4350,3203}

1998/05/11 New Engine Lifter Arm Assembly With Crowned Roller Used In Lifter Groups {1209}

1998/05/18 Removing Fuel Tank {1273}