Usage:
Challenger 75D (5AR) Agricultural Tractors Powered By 3176C (7ZR) Engines, Challenger 85D (4GR) Agricultural Tractors Powered By 3196 (6AR) Engines
- SUPPLEMENT: 7/20/98
Service Magazine; May 11, 1998; Page 5; "New Gear Assembly And Stub Shaft Used In Front Gear Group"
In the first paragraph of the Adaptable To section, the part number 129-0418 is NOT correct. The correct part number of the Gear Assembly is 128-0419.
--------------- END SUPPLEMENT ---------------
Description of Change: A new gear assembly and stub shaft are used in the front gear group on the engines in these tractors. The new gear assembly has the web centered on the gear to allow alignment of the center of the bearing with the center of the gear. By aligning the bearing and the gear, the idler will maintain true alignment of the gear teeth under high loads.
Location of the new 133-7083 Stub Shaft (1) and 133-7086 Gear Assembly in the 117-2750 Front Gear Group
Adaptable To: When used together, the new 133-7083 Stub Shaft (1) and 133-7086 Gear Assembly are a direct replacement for the 119-3778 Stub Shaft and 119-3777 or 129-0418 Gear Assembly in the 117-2750 Front Gear Group on engines in these tractors.
NOTE: The bearing and gear which make up the 133-7086 Gear Assembly are not available for part service separately.
NOTE: The 133-7083 Stub Shaft must be used when using the 133-7086 Gear Assembly.
NOTE: The new 133-7083 Stub Shaft and 133-7086 Gear Assembly can NOT be used on 3176 (43Z) Machine Engines because of a lack of front cover clearance.