GREASE LUBRICATED PIN AND BUSHING GROUPS FOR 330 - 315 HYDRAULIC EXCAVATORS Caterpillar


GREASE LUBRICATED PIN AND BUSHING GROUPS FOR 330 - 315 HYDRAULIC EXCAVATORS

Usage:

 Information Release Memo

UC04-16 

 
  CAT?

Undercarriage  

 

August 2004   

 

GREASE LUBRICATED PIN AND BUSHING GROUPS FOR 330 - 315 HYDRAULIC EXCAVATORS

Grease Lubricated Pin and Bushing Groups are now available in the parts department for 330, 325, 320S, 322, 321, 320, 319, 318, 317, and 315 Hydraulic Excavators.  Each group contains pins, bushings, and track seals to service one link assembly.  Typically the quantities of each component in the pin and bushing groups are based on the longest link assembly for the different models based on pitch size.  The groups are provided at a value price that is less than having to buy the individual components.  This will allow you to replace the pin and bushings after turn, if needed to obtain total link life wear out, providing lower cost per hour to operate the machine. 

Models and Pin & Bushing Group Part Numbers  

 

Model

Number of Sections

Part Number

330C, 330B, 330

49

   246-1908 *

325C, 325B, 325, 320SC, 320S

48

   246-1907 *

315C, 315B, 315, 317B, 317, 318C, 318B, 319C, 320C, 320B, 320, 321C, 322C, 322B, 322

51

246-1906

 

*Contains master track pin for press fit link assemblies.  Pin and Bushing Group can be used with slip fit link assemblies, but must order slip fit master pin separately.

 See Attachment I, for consist of the pin and bushing groups by model.

 

Custom Track Service (CTS)

When performing Custom Track Service (CTS), refer to wear charts found in the CTS Handbook 15th Edition (Media Number PEK9400-03).

 

Servicing

When performing service on grease lubricated track link assemblies (turning pin and bushing, replacing components), refer to Undercarriage Reconditioning Bulletin Media No. SEBF8598, dated February 2001.

 The following grease lubricants are available in the parts department:

 

Grease Part Number

Quantity

Description

161-9203

1 lb

cartridge

206-7404

35 lb

5 gallon pail

206-7405

120 lb

16 gallon keg

206-7406

400 lb

55 gallon drum

Summary

Grease lubricated link (GLT) assemblies offer a significant wear life and cost/hour advantage over comparable sealed link assemblies.

 

TCRobertson                                                               LAGetz

Undercarriage Marketing Division                                 Undercarriage Marketing Division

Parts and Service Marketing                                         Parts and Service Marketing

CV4111 ? (309) 675-7879                                          CV4111 ? (309) 675-3977

E-mail: Robertson_Thomas@cat.com               E-mail: Getz_Lindsey_A@cat.com


 

 

Attachment I

Name

Quantity

Part Number

Pin and Bushing Group (49 Sections)

1

246-1908

     Track Pin

48

6Y-2751

     Track Pin Master

1

6Y-2748*

     Track Bushing

201-0827

     Track Bushing Master

1

201-0828

     Track Seal

     Track Seal Master                                                                            

96

2

179-3426

179-3428

325C, 325B, 325, 320SC, 320S

                                                                                                    8.00? (203.2mm) Pitch

 

Name

Quantity

Part Number

Pin and Bushing Group (48 Sections)

1

246-1907

     Track Pin

47

6Y-0851

     Track Pin Master

1

6Y-0850**

     Track Bushing

201-0825

     Track Bushing Master

1

201-0826

     Track Seal

     Track Seal Master

94

2

179-3425

179-3427

** If Pin & Bushing Group is used with slip fit link assembly order: (1) 188-3065 Slip Fit Master Pin

 

315C, 315B, 315, 317B, 317, 318C, 318B, 319C, 320C,

320B, 320, 321C, 322C, 322B, 322

                                                                                            7.50? (190.5mm) Pitch

 

Name

Quantity

Part Number

Pin and Bushing Group (51 Sections)

1

246-1906

     Track Pin

50

6Y-8186

     Track Pin Master

1

188-3064

     Track Bushing

190-3523

     Track Bushing Master

1

190-3524

     Track Seal

     Track Seal Master

100

2

158-4380

158-4381

 

 

 

 
PELJ0390

CATERPILLAR?

?2003 Caterpillar

Caterpillar Information System:

CATERPILLAR CLASSIC PARTS FOR D300/3300 PRE-COMBUSTION (PC) ENGINES - UPDATED CATERPILLAR CLASSIC PARTS FOR D300/3300 PRE-COMBUSTION (PC) ENGINES - UPDATED
REMANUFACTURED FUEL INJECTOR GROUPS WITH IMPROVED COATED PLUNGERS FOR VARIOUS D3500 STANDARD ; LONG STROKE APPLICATIONS REMANUFACTURED FUEL INJECTOR GROUPS WITH IMPROVED COATED PLUNGERS FOR VARIOUS D3500 STANDARD & LONG STROKE APPLICATIONS
NEW SINGLE PIECE FORGED STEEL (SPFS) PISTON RELEASED FOR CATERPILLAR® NEW SINGLE PIECE FORGED STEEL (SPFS) PISTON RELEASED FOR CATERPILLAR®
REMANUFACTURED HEUI PUMPS FOR C7 AND C9 ENGINES WITH ACERT® TECHNOLOGY FOR ON-HIGHWAY TRUCK, GENSET, MARINE AND MACHINE APPLICATIONS REMANUFACTURED HEUI PUMPS FOR C7 AND C9 ENGINES WITH ACERT® TECHNOLOGY FOR ON-HIGHWAY TRUCK, GENSET, MARINE AND MACHINE APPLICATIONS
REMANUFACTURED GOVERNOR GROUPS FOR 3114 ; 3116 ENGINES REMANUFACTURED GOVERNOR GROUPS FOR 3114 & 3116 ENGINES
CATERPILLAR INTRODUCES NEW PRODUCT SUPPORT STRATEGY FOR MINI HYDRAULIC EXCAVATOR RUBBER BELTS CATERPILLAR INTRODUCES NEW PRODUCT SUPPORT STRATEGY FOR MINI HYDRAULIC EXCAVATOR RUBBER BELTS
CUSTOM TRACK SERVICE HANDBOOK TRANSLATIONS CUSTOM TRACK SERVICE HANDBOOK TRANSLATIONS
CHANGE OF CORE CRITERIA FOR UPGRADE TO NEW CRANKSHAFTS CHANGE OF CORE CRITERIA FOR UPGRADE TO NEW CRANKSHAFTS
REMANUFACTURED FUEL VALVE GROUPS FOR GAS 3500 REMANUFACTURED FUEL VALVE GROUPS FOR GAS 3500
3RD QUARTER 2004 AVAILABILITY OF VVA FOR C11/C13 3RD QUARTER 2004 AVAILABILITY OF VVA FOR C11/C13
PRODUCT UPGRADE: XT-6TM HOSE ; COUPLINGS TO XT-6 ES COMPONENTS PRODUCT UPGRADE: XT-6TM HOSE & COUPLINGS TO XT-6 ES COMPONENTS
THE REMANUFACTURED PRODUCTS GROUP ANNOUNCES A THE REMANUFACTURED PRODUCTS GROUP ANNOUNCES A
UNDERCARRIAGE RESOURCE CD 2nd EDITION UNDERCARRIAGE RESOURCE CD 2nd EDITION
CATERPILLAR® REMANUFACTURED FUEL INJECTOR FOR 3126B AND C7 MARINE ENGINES CATERPILLAR® REMANUFACTURED FUEL INJECTOR FOR 3126B AND C7 MARINE ENGINES
CATERPILLAR® REMANUFACTURED FUEL INJECTOR PRODUCT LINE EXPANDED CATERPILLAR® REMANUFACTURED FUEL INJECTOR PRODUCT LINE EXPANDED
COSMETIC CHANGE TO REMAN CYLINDER HEADS COSMETIC CHANGE TO REMAN CYLINDER HEADS
NEW HYBRID TRACK FOR TRACTORS, LOADERS, EXCAVATORS, AND FELLER BUNCHERS 8.00� (203.2mm) PITCH NEW HYBRID TRACK FOR TRACTORS, LOADERS, EXCAVATORS, AND FELLER BUNCHERS 8.00� (203.2mm) PITCH
345B EXCAVATOR POSITIVE PIN RETENTION GREASE LUBRICATED LINK ASSEMBLY 345B EXCAVATOR POSITIVE PIN RETENTION GREASE LUBRICATED LINK ASSEMBLY
CHANGES TO HYDRAULIC ROD AND CYLINDER CORE ACCEPTANCE CRITERIA CHANGES TO HYDRAULIC ROD AND CYLINDER CORE ACCEPTANCE CRITERIA
MINI HYDRAULIC EXCAVATOR BELTS MINI HYDRAULIC EXCAVATOR BELTS
Off-Highway Truck Brake Repair Kits (only applicable for models 777 through 793) Off-Highway Truck Brake Repair Kits (only applicable for models 777 through 793)
REMAN CYLINDER HEAD GROUPS AND VALVE MECHANISMS REMAN CYLINDER HEAD GROUPS AND VALVE MECHANISMS
REMANUFACTURED TURBOCHARGERS AND CARTRIDGES COMPONENTS FOR ON-HIGHWAY AND OFF-HIGHWAY APPLICATIONS REMANUFACTURED TURBOCHARGERS AND CARTRIDGES COMPONENTS FOR ON-HIGHWAY AND OFF-HIGHWAY APPLICATIONS
REMANUFACTURED ENGINE COMPONENTS FOR C15 (SERIAL # BXS AND SERIAL # MXS) ON-HIGHWAY APPLICATIONS WITH ACERT� TECHNOLOGY REMANUFACTURED ENGINE COMPONENTS FOR C15 (SERIAL # BXS AND SERIAL # MXS) ON-HIGHWAY APPLICATIONS WITH ACERT� TECHNOLOGY
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.