Improved Circuit Breaker Bus Bars are Now Used on Certain C32, C175, 3500, and G3500 Generator Sets {1420, 445B}
- Electric Power Generation
- 3512B GENSET (S/N: ZAJ1-182)
- 3516B GEN SET (S/N: ZAP1-501)
- 3516C GEN SET (S/N: SBK1-2792)
- C175-16 GEN SET (S/N: WYB1-2225)
- 3516B GEN SET (S/N: ZAP1-501)
- Engine
- 3512C (S/N: SBG1-1305)
- 3516 (S/N: YAS1-532)
- 3516B (S/N: PBR1-626; YAT1-1096; YBT1-567; YBW1-192)
- 3516C (S/N: SBJ1-2213; SFJ1-874; SEK1-1276; SFK1-120)
- G3516H (S/N: NWJ1-103; GLM1-138; GLN1-136)
- 3516 (S/N: YAS1-532)
- Generator Set
- C32 GEN SET (S/N: SXC1-5470; JSJ1-1879)
Description Of Change: The circuit breaker bus bars contain a single piece glastic bar.
Adaptable To:
Show/hide table
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
The improvement has been made to the circuit breaker bus bars listed in Table 1.
Show/hide table
Part Number | Part Name |
---|---|
Circuit Breaker As | |
Circuit Breaker As | |
Circuit Breaker As | |
Circuit Breaker As | |
Circuit Breaker As | |
Circuit Breaker As | |
Circuit Breaker As | |
Circuit Breaker As | |
Circuit Breaker As | |
Circuit Breaker As | |
Circuit Breaker As | |
Circuit Breaker Gp | |
Circuit Breaker Gp | |
Circuit Breaker Gp | |
Circuit Breaker Gp | |
Circuit Breaker Gp | |
Circuit Breaker Gp | |
Circuit Breaker Gp | |
Circuit Breaker Gp | |
Circuit Breaker Gp | |
Circuit Breaker As | |
Circuit Breaker As |
Caterpillar Information System:
120 Motor Grader Monitoring System Display Module
120 and 120 AWD Motor Grader Declaration of Conformity
336, and 340 Excavator TA2 Technical Inspection {0372, 0374, 1000, 7000, 753T, 7565} 336, and 340 Excavator TA2 Technical Inspection {0372, 0374, 1000, 7000, 753T, 7565}
120 and 120 AWD Motor Grader Fuel System Water Separator - Drain
C27 and C32 Generator Set Engines Crankshaft Position Sensor - Remove and Install
120 and 120 AWD Motor Grader Transmission and Differential Oil Sample - Obtain
XQ570 Rental Generator Set Setup
120 and 120 AWD Motor Grader Belts - Inspect/Adjust/Replace
120 and 120 AWD Motor Grader Transmission and Differential Oil Level - Check
120 and 120 AWD Motor Grader Transmission and Differential Oil Filter and Screens - Replace/Clean
794 AC Off-Highway Truck Engine Components - Clean/Inspect, Rebuild/Install Reman, Install New
794 AC Off-Highway Truck Exhaust Outlet Nitrogen Oxide Sensor - Replace
Improved Dust Seal for the Swing Gear and Bearing is Now Available on Certain Excavators {7063} Improved Dust Seal for the Swing Gear and Bearing is Now Available on Certain Excavators {7063}
3500E Marine Engines Engine Oil Level - Check
C27 and C32 Generator Set Engines Coolant Temperature Sensor - Remove and Install
High Soot Loading on Certain C7.1 Engines {1000, 108D} High Soot Loading on Certain C7.1 Engines {1000, 108D}
120 Motor Grader Monitoring System Menus
308 Mini Hydraulic Excavators Daily Inspection
C175-16 Generator Set Filter Screen (Air) - Clean/Replace
C175-16 Generator Set Filter Screen (DEF) - Inspect/Clean
120 Motor Grader Monitoring System Display Menu
794 AC Off-Highway Truck Cooling System Coolant Sample (Level 1) - Obtain
794 AC Off-Highway Truck Cooling System Coolant Sample (Level 2) - Obtain
794 AC Off-Highway Truck Engine Oil - Change