New Panel Groups are Now Used on Certain XQ35 and XQ60 Generator Sets {4490, 7490}
- Electric Power Generation
- C2.2 GEN SET (S/N: JK7340-UP; JK8116-UP)
- Engine
- C3.4B (S/N: CF6276-UP; CF9121-UP)
- Engine Package
- 3.4B (S/N: CF6276-UP; CF9121-UP)
The new panel groups allow the use of large mechanical cable lugs for bus bar connections.
Note: The new part numbers 505-8660 Electronic Panel Gp, and 521-3680 Electronic Panel Gp are not backwards compatible.
Table contains the generator sets and the corresponding new parts.
Show/hide table
| Generator Set | New Part Number | Part Name | Quantity |
|---|---|---|---|
| C2.2 XQ35 | Electronic Panel Gp | 1 | |
| C3.4B XQ60 | Electronic Panel Gp | 1 |
Caterpillar Information System:
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202} New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202} New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Restricted Visibility
New Software Updates Are Now Used On Certain C9.3 through C18 Engines {1920} New Software Updates Are Now Used On Certain C9.3 through C18 Engines {1920}
320D3 Excavators Lifting and Tying Down the Machine
320D3 Excavators Securing the Machine
320D3 Excavators Leaving the Machine
320D3 and 323D3 Excavators Systems Relief Valve (Main)
New Engine Software is Now Used on Certain C9 Industrial Engines {1920} New Engine Software is Now Used on Certain C9 Industrial Engines {1920}
The 293-4388 Clamp As May Break on Certain 3500 Series Engines {1051, 1054} The 293-4388 Clamp As May Break on Certain 3500 Series Engines {1051, 1054}
Rework Procedure for New Voltage Selector Switch Cable Routing Now Used on Certain XQ35 and XQ60 Generator Sets {1410} Rework Procedure for New Voltage Selector Switch Cable Routing Now Used on Certain XQ35 and XQ60 Generator Sets {1410}
The Buffer Seal Assembly in the Steering Cylinder Group May Wear Prematurely on Certain 773G, 775G, and 777G Off-Highway Trucks {4303, 7555} The Buffer Seal Assembly in the Steering Cylinder Group May Wear Prematurely on Certain 773G, 775G, and 777G Off-Highway Trucks {4303, 7555}
320D3 and 323D3 Excavators Systems Relief Valve (Swing)
320D3 and 323D3 Excavators Systems Oil Makeup (Swing System)
320D3 Hydraulic Excavator Machine Systems Stick Cylinder - Assemble
320D3 and 323D3 Excavators Systems Travel Hydraulic System
320D3 Excavators Bucket Tips - Inspect/Replace - Drive-through System
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Seat - Remove and Install
320D3 Excavators Bucket Tips - Inspect/Replace
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement System Pressure - Release
PM820, PM822, and PM825 Cold Planer Air Pressure Regulator
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Cab Heater - Remove and Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Electronic Control (Diesel Exhaust Fluid) - Remove and Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Solenoid Valve (DEF Heater Coolant) - Remove and Install