A New Duplex Oil Filter Control Plate Is Now Used For Certain C175 Engines {131D, 7557}
- Marine Engine
- C175-16 (S/N: M6A1000-1008; M6B1002-1004)
- Petroleum Engine
- C175-16 (S/N: P6L1018-1091; P5P1001-1002)
Description Of Change: The new oil filter control plate that is used corrects the labeling for the oil filter bypass.
Adaptable To:
Show/hide table
Illustration 1 | g06064276 |
(1) Previous oil film
(2) |
The new 498-2819 Control Plate replaces the previous control plate. Table 1 contains the new parts information. Table 2 contains the effective serial numbers.
Show/hide table
Qty | Part Number | Part Description |
---|---|---|
4 | 2F-0808 | Screw |
1 | 498–2819 | Control Plate |
Show/hide table
Effective Serial Numbers |
---|
S/N:M6A01009-UP |
S/N:M6B01005-UP |
S/N:P5P01003-UP |
S/N:P6L01092-UP |
Caterpillar Information System:
A New Damper Is Used on Certain 3512C Tier 3 Marine Engines {1205} A New Damper Is Used on Certain 3512C Tier 3 Marine Engines {1205}
3516C Generator Set Engines Air Inlet Manifold - Remove and Install
Autonomous Stop (A-Stop) System Components
Autonomous Stop (A-Stop) General Information
Selective Catalytic Reduction Retrofit Aftertreatment Electronic Service Tools
G3512 Generator Set Engines Data Link - Test
797F Off-Highway Truck Capacities (Refill)
C7.1 Marine Engine Exhaust Manifold - Remove and Install
Autonomous Stop (A-Stop) A-Stop Transmitter
3512E HD Petroleum Engines Additional Messages
Autonomous Stop (A-Stop) Testing the A-Stop System in the Field
3512E Engines Exhaust Cooler (NRS) - Remove and Install
A New Vertical Exhaust Elbow is Available for Certain 3512 and 3516 Marine Engines {1061} A New Vertical Exhaust Elbow is Available for Certain 3512 and 3516 Marine Engines {1061}
C12.9 Marine Engines Crankshaft - Remove and Install
3512E Engines Exhaust Gas Valve (NRS) - Remove and Install
G3516 TA Engine Data Link - Test
New Software Is Now Used on Certain C175-16 Engines {1920} New Software Is Now Used on Certain C175-16 Engines {1920}
C12.9 Marine Engines Flywheel Housing - Remove and Install
G3512 Generator Set Engines Data Link Configuration Status - Test
New Engine Software for Certain C4.4 Generator Sets {7610, 7620} New Engine Software for Certain C4.4 Generator Sets {7610, 7620}
New Transmission Software Is Now Used for Certain CX31 On Highway Transmissions {7620} New Transmission Software Is Now Used for Certain CX31 On Highway Transmissions {7620}
320 GC, 320 and 323 Excavator Engine Air Filter Primary and/or Secondary Element - Replace
3516E Generator Set Coolant Level - Check
C12.9 Marine Engines Engine Support (Rear) - Remove and Install