C18 Generator Set Engines Caterpillar


Fuel Temperature Sensor - Remove and Install

Usage:

C18 GEN SE RT8

Removal Procedure



    Illustration 1g06053568

  1. Disconnect harness assembly (1) and remove fuel temperature sensor (2).

Installation Procedure

  1. Install fuel temperature sensor (2) in the reverse order of removal.

    1. Tighten fuel pressure sensor 2 to a torque of 20 ± 3 N·m (177.0 ± 26.6 lb in).

Caterpillar Information System:

G3512 Generator Set Refill Capacities
C9.3 Marine Auxiliary and Generator Set Engine Speed Control - Test
G3512 Generator Set Emergency Stopping
G3512 Generator Set Cold Weather Starting
G3512 Generator Set Before Starting Engine
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Check Valve
C18 Generator Set Engines Fuel Pressure Sensor - Remove and Install
C18 Generator Set Engines Crankcase Pressure Sensor - Remove and Install
G3512 Generator Set Engines Sensor Signal (Analog, Active) - Test
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Alarms and Shutoffs
C18 Generator Set Engines Engine Oil Pressure Sensor - Remove and Install
XQP150 Rental Generator Set Setup
General Troubleshooting Guidelines For Nitrite Levels For Certain Gas Engines {0769, 1000, 1352, 1395} General Troubleshooting Guidelines For Nitrite Levels For Certain Gas Engines {0769, 1000, 1352, 1395}
C18 Generator Set Engines Pressure Sensor (ARD Combustion Air) - Remove and Install
C18 Generator Set Engines Temperature Sensor (Catalyst Inlet) - Remove and Install
C9.3 Marine Auxiliary and Generator Set Engine Data Link - Test
C18 Generator Set Engines Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Belts - Inspect/Adjust/Replace
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Coolant (NGEC) - Change
G3512 Generator Set Engines Sensor Signal (Analog, Passive) - Test
C18 Generator Set Engines Pressure Sensor (DPF) - Remove and Install
3500C IMO III Engines Fuel Injector Adjustment
Installing New Radiator Core Washers on Certain 3516 Generator Sets {1353, 1377} Installing New Radiator Core Washers on Certain 3516 Generator Sets {1353, 1377}
Installation Instruction for the 340-6283 Engine Oil Filter Element for C175 Engines {1000, 1308, 7000, 7519} Installation Instruction for the 340-6283 Engine Oil Filter Element for C175 Engines {1000, 1308, 7000, 7519}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.