Nitrogen Oxide Sensor - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | - | Loctite Nickel Anti-Seize | 1 |
- Disconnect harness assembly (3).
- Remove cable straps (2) and nitrogen oxide sensor (1).
Show/hide table
| |
| Illustration 1 | g06052648 |
- Install nitrogen oxide sensor (1) in the reverse order of removal.
- Apply Tooling (A) to nitrogen oxide sensor (1).
- Tighten nitrogen oxide sensor (1) to a torque of
50 ± 10 N·m (36.9 ± 7.4 lb ft) .
Caterpillar Information System:
New Engine Software Is Now Available For Certain C18 630 hp Industrial Engines {1920} New Engine Software Is Now Available For Certain C18 630 hp Industrial Engines {1920}
XQP150 Rental Generator Set Radiator - Clean
XQP150 Rental Generator Set Engine Oil Sample - Obtain
C18 Generator Set Engines Bearing Clearance - Check
XQP150 Rental Generator Set Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
XQP150 Rental Generator Set Coolant Level - Check
XQP150 Rental Generator Set Coolant Extender (ELC) - Add
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Model View Illustrations
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Generator Isolating for Maintenance
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Engine Starting
C18 Generator Set Engines Crankshaft - Remove and Install
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Sound Information
XQP150 Rental Generator Set Hoses and Clamps - Inspect/Replace
XQP150 Rental Generator Set Fuel System - Prime
C18 Generator Set Engines Atmospheric Pressure Sensor - Remove and Install
C7.1 Industrial Engine Flywheel Housing - Remove and Install
3512E Engines Housing (Front) - Remove and Install
XQP150 Rental Generator Set Control Panel
C12.9 Marine Engines Aftercooler - Remove and Install - High-Pressure
C18 Generator Set Engines Camshaft Position Sensor - Remove and Install
C175 Tier 4 Final Engines for Off-Highway Trucks Coolant Pressure Is Low
XQP150 Rental Generator Set Generator Lead Connections
Bench Test Procedure For A TA22 Construction Transmission {0374, 0599, 3030, 3065, 3139, 3167, 3182} Bench Test Procedure For A TA22 Construction Transmission {0374, 0599, 3030, 3065, 3139, 3167, 3182}
G3512 Generator Set Product Description