Turbocharger
Show/hide table
 | |
| 图 1 | g03348138 |
典型示例 | |
Show/hide table
| 375-9998 涡轮增压器总成 、 370-3235 涡轮增压器总成 和 370-1018 涡轮增压器总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 2 | 385-4584 涡轮卡箍组件 | 按照以下步骤拧紧卡箍组件： 1. 将卡箍拧紧至 14 ± 1 N·m (124 ± 9 lb in) 的扭矩。 2. 用软面锤轻轻敲打卡箍周围。 3. 再次拧紧卡箍至扭矩为 14 ± 1 N·m (124 ± 9 lb in)。 |
| 2 | 2 | 189-5124 压缩机卡箍组件 | |
| 3 | 8 | 2N-2766 锁紧螺母 | 组装前，将 Loctite C5A 铜防咬合剂涂覆到螺纹和轴承表面。 不要重复使用锁紧螺母。 拧紧至扭矩为 54 ± 5 N·m (40 ± 4 lb ft)。 |
Caterpillar Information System:
C32 Marine Engines Piston and Rings
C280-16 Engine Coolant - Change
C18 Locomotive Engine Exhaust Cooler (NRS) - Remove and Install - For Series Turbocharger Applications
C280-16 Engine Engine Oil Temperature Regulator - Replace
C280-16 Engine Engine Oil Filter - Change
C280-16 Engine Engine Oil - Change
C280-16 Engine Aftercooler Condensation - Drain
2014/04/15 An Improved Lip Type Seal and Wear Sleeve Seal Are Now Used in the Transfer Gear Group of Certain 777 Off-Highway Trucks {3159}
C280-16 Engine Air Shutoff - Test
2013/02/18 A New Compressor Outlet Bracket Is Used for Certain G3512E Engines {1071}
C18 Locomotive Engine Exhaust Manifold - Remove and Install - For Series Turbocharger Applications
C175-16 Locomotive Engine Air Inlet and Exhaust System Operation
C32 Marine Engines Aftercooler
C32 Marine Engines Cylinder Head Valves
C32 Marine Engines Auxiliary Water Pump - Sea water
C7.1 Industrial Engine Maintenance Interval Schedule
C175-16 Locomotive Engine Crankshaft - Remove and Install
C175-16 Locomotive Engine Coolant Temperature Is Low
C175-16 Locomotive Engine Electronic Control Module (Engine) - Remove and Install
C175-16 Locomotive Engine Camshaft - Remove and Install
C175-16 Locomotive Engine Fuel Filter Housing - Remove and Install
C175-16 Locomotive Engine Pressure Sensor
C4.4 Industrial Engine Alternator and Fan Belts - Replace
C175-16 Locomotive Engine Fuel Filter Base