Auxiliary Water Pump - Sea water
Show/hide table
 | |
| 图 1 | g03347673 |
Show/hide table
| 355-0325 辅助海水泵总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 1 | 310-3954 O 形密封圈 | 装配时，采用经认可的固定剂进行固定。 |
| 2 | 2 | - | 将排放塞拧紧至扭矩为 15 至 18 N·m (133 至 159 lb in)。 |
| 3 | 1 | - | 齿轮安装螺钉螺纹必须清洁，没有任何污染，不要在螺纹上涂覆任何 Loctite。 |
| 将齿轮安装螺钉拧紧至扭矩为 55 ± 7 N·m (41 ± 5 lb ft)。 |
|||
| 4 | 4 | - | 拧紧螺栓至 23 到 25 N·m (204 到 221 lb in)。 |
| 5 | 3 | - | 拧紧螺栓至 23 到 25 N·m (204 到 221 lb in)。 |
Caterpillar Information System:
C32 Marine Engines Cylinder Head Valves
C32 Marine Engines Aftercooler
C27 and C32 Tier 4 Final Marine Engines Turbocharger
C32 Marine Engines Piston and Rings
C280-16 Engine Coolant - Change
C18 Locomotive Engine Exhaust Cooler (NRS) - Remove and Install - For Series Turbocharger Applications
C280-16 Engine Engine Oil Temperature Regulator - Replace
C280-16 Engine Engine Oil Filter - Change
C280-16 Engine Engine Oil - Change
C280-16 Engine Aftercooler Condensation - Drain
2014/04/15 An Improved Lip Type Seal and Wear Sleeve Seal Are Now Used in the Transfer Gear Group of Certain 777 Off-Highway Trucks {3159}
C280-16 Engine Air Shutoff - Test
C7.1 Industrial Engine Maintenance Interval Schedule
C175-16 Locomotive Engine Crankshaft - Remove and Install
C175-16 Locomotive Engine Coolant Temperature Is Low
C175-16 Locomotive Engine Electronic Control Module (Engine) - Remove and Install
C175-16 Locomotive Engine Camshaft - Remove and Install
C175-16 Locomotive Engine Fuel Filter Housing - Remove and Install
C175-16 Locomotive Engine Pressure Sensor
C4.4 Industrial Engine Alternator and Fan Belts - Replace
C175-16 Locomotive Engine Fuel Filter Base
C175-16 Locomotive Engine Fuel Filter Base
C4.4 Engines for Caterpillar Built Machines Fuel Priming Pump - Mechanical Priming Pump
C175-16 Locomotive Engine Camshaft Bearings - Remove and Install