Swing Gear and Bearing
Show/hide table
Illustration 1 | g03346834 |
Typical example Top view |
Show/hide table
Item | Qty | Part | Specification Description |
- | - | - | Position "S" that is on inner race (3) relative to the carbody assembly (1) and bearing stopper (2). Refer to Illustration 1. |
Show/hide table
Illustration 2 | g03346835 |
Show/hide table
Item | Qty | Part | Specification Description |
4 | 2 | Bolt | Before assembly, apply blue Loctite 242 to the threads. |
Torque to |
|||
Torque to |
|||
5 | 1 | 7Y-1650 Hose Clamp | Torque to |
6 | 8 | Bolt | Before assembly, apply blue Loctite 242 to the threads. |
Torque to |
|||
7 | 1 | 7Y-1095 Dowel | Before assembly, apply Loctite C5A Cooper Anti-Seize to dowel holes. |
8 | - | - | Apply sealant between the mating surfaces of the gear group and upper frame assembly. Apply sealant between the mating surfaces of the gear group and carbody assembly. |
9 | 4 | Bolt | Before assembly, apply blue Loctite 242 to the threads. |
Torque to |
|||
10 | 15 | Bolt | Before assembly, apply Loctite C5A Cooper Anti-Seize to the threads. Do not apply Anti-seize Compound to the seats of the bolts or to the washer faces. |
Torque to |
|||
11 | — | 112-1531 Bolt | Before assembly, apply Loctite C5A Cooper Anti-Seize to the threads. Do not apply Anti-seize Compound to the seats of the bolts or to the washer faces. |
Torque to |
|||
12 | 31 | Bolt | Before assembly, apply Loctite C5A Cooper Anti-Seize to the threads. Do not apply Anti-seize Compound to the seats of the bolts or to the washer faces. |
Torque to |
Show/hide table
(1) | For 296-6308. |
Caterpillar Information System:
C13, C15, and C18 Generator Set Engines Exhaust Manifold
C7.1 Engines for Caterpillar Built Machines Fuel Injection
C7.1 Engines for Caterpillar Built Machines Turbocharger - Inspect
C7.1 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
C7.1 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
C7.1 Engines for Caterpillar Built Machines Basic Engine
C7.1 Engines for Caterpillar Built Machines Introduction
C18 Marine Propulsion Engines Cylinder Block
C7.1 Engines for Caterpillar Built Machines Compression - Test
C7.1 Engines for Caterpillar Built Machines Fuel System - Prime
C1.5 and C2.2 Industrial Engines ARD Combustion Air - Test
C18 Marine Propulsion Engines Cylinder Head
2013/04/22 An Improved Oil Level Gauge Is Now Used on Certain C15 Generator Sets {1326}
C7.1 Engines for Caterpillar Built Machines Electronic Control System
C18 Marine Propulsion Engines Heat Exchanger
C7.1 Engines for Caterpillar Built Machines Power Sources
C4.4 (Mech) Marine Generator Set MCS-3 Engine Crankcase Breather Element - Replace - Turbocharged Engines
C7.1 Engines for Caterpillar Built Machines Glossary of Electronic Control Terms
C4.4 (Mech) Marine Generator Set MCS-3 Maintenance Interval Schedule - Turbocharged Marine Generator Set Without Aftercooler
C175-16 Locomotive Engine Electronic Control Module (ECM)
C7.1 Engines for Caterpillar Built Machines Air in Fuel - Test
C4.4 (Mech) Marine Generator Set MCS-3 Severe Service Application
C7.1 Engines for Caterpillar Built Machines Fuel Injection Timing - Check
C4.4 (Mech) Marine Generator Set MCS-3 Engine Crankcase Breather - Replace - Turbocharged Engines