Exhaust Manifold
Show/hide table
Illustration 1 | g03346803 |
Show/hide table
Illustration 2 | g03346804 |
Tightening sequence |
Show/hide table
Specification for 320-7495 Exhaust Manifold Gp | |||
Item | Qty | Part | Specification Description |
1 | 8 | 6L-8562 Taperlock Stud | Before assembly, apply Loctite C5A Copper Anti-Seize to the threads and bearing surfaces.
Torque to |
2 | 1 | 109-0073 O-Ring Seal | Before assembly, lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
3 | 1 | 6V-4367 O-Ring Seal | Before assembly, lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
4 | 12 | 106-1792 Taperlock Stud | Before assembly, apply Loctite C5A Copper Anti-Seize to the threads and bearing surfaces. |
Torque to |
|||
5 | 12 | 2N-2766 Locknut | Torque to Refer to Illustration 2 for the locknut tightening sequence. |
6 | 2 | 109-0072 O-Ring Seal | Before assembly, lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
Caterpillar Information System:
C7.1 Engines for Caterpillar Built Machines Fuel Injection
C7.1 Engines for Caterpillar Built Machines Turbocharger - Inspect
C7.1 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
C7.1 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
C7.1 Engines for Caterpillar Built Machines Basic Engine
C7.1 Engines for Caterpillar Built Machines Introduction
C18 Marine Propulsion Engines Cylinder Block
C7.1 Engines for Caterpillar Built Machines Compression - Test
C7.1 Engines for Caterpillar Built Machines Fuel System - Prime
C1.5 and C2.2 Industrial Engines ARD Combustion Air - Test
C18 Marine Propulsion Engines Cylinder Head
C18 Industrial Engine Variable Valve Actuator - Test
336F and 340F Excavators Machine System Specifications Swing Gear and Bearing
2013/04/22 An Improved Oil Level Gauge Is Now Used on Certain C15 Generator Sets {1326}
C7.1 Engines for Caterpillar Built Machines Electronic Control System
C18 Marine Propulsion Engines Heat Exchanger
C7.1 Engines for Caterpillar Built Machines Power Sources
C4.4 (Mech) Marine Generator Set MCS-3 Engine Crankcase Breather Element - Replace - Turbocharged Engines
C7.1 Engines for Caterpillar Built Machines Glossary of Electronic Control Terms
C4.4 (Mech) Marine Generator Set MCS-3 Maintenance Interval Schedule - Turbocharged Marine Generator Set Without Aftercooler
C175-16 Locomotive Engine Electronic Control Module (ECM)
C7.1 Engines for Caterpillar Built Machines Air in Fuel - Test
C4.4 (Mech) Marine Generator Set MCS-3 Severe Service Application
C7.1 Engines for Caterpillar Built Machines Fuel Injection Timing - Check