Engine Crankcase Breather Element - Replace - Turbocharged Engines
Show/hide table
注意 |
---|
在发动机停机时进行该保养。 |
注: 发动机可自动起动。 执行任何维护或修理前,确保电源隔离。
- 清除通气孔组件 (1) 外侧的所有污垢和机油。
Show/hide table
图 2 g01157174 典型示例 - 将盖子 (2) 逆时针转动约 15 度。 拆下盖子。
- 拆下 O 形密封圈 (3)。
- 拆下曲轴箱通风器滤清器 (4)。
- 拆下 O 形密封圈 (5)。
- 安装新 O 形密封圈 (5)。
- 安装新的曲轴箱通风器滤清器 (4)。
- 安装新 O 形密封圈 (3)。
- 安装盖 (2)。
Show/hide table
图 1 | g02160981 |
典型示例 |
Caterpillar Information System:
C7.1 Engines for Caterpillar Built Machines Power Sources
C18 Marine Propulsion Engines Heat Exchanger
C7.1 Engines for Caterpillar Built Machines Electronic Control System
2013/04/22 An Improved Oil Level Gauge Is Now Used on Certain C15 Generator Sets {1326}
336F and 340F Excavators Machine System Specifications Swing Gear and Bearing
C13, C15, and C18 Generator Set Engines Exhaust Manifold
C7.1 Engines for Caterpillar Built Machines Fuel Injection
C7.1 Engines for Caterpillar Built Machines Turbocharger - Inspect
C7.1 Engines for Caterpillar Built Machines Air Inlet and Exhaust System - Inspect
C7.1 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
C7.1 Engines for Caterpillar Built Machines Basic Engine
C7.1 Engines for Caterpillar Built Machines Introduction
C7.1 Engines for Caterpillar Built Machines Glossary of Electronic Control Terms
C4.4 (Mech) Marine Generator Set MCS-3 Maintenance Interval Schedule - Turbocharged Marine Generator Set Without Aftercooler
C175-16 Locomotive Engine Electronic Control Module (ECM)
C7.1 Engines for Caterpillar Built Machines Air in Fuel - Test
C4.4 (Mech) Marine Generator Set MCS-3 Severe Service Application
C7.1 Engines for Caterpillar Built Machines Fuel Injection Timing - Check
C4.4 (Mech) Marine Generator Set MCS-3 Engine Crankcase Breather - Replace - Turbocharged Engines
C280-16 Engine Product Description
C7.1 Marine Engine Fuel Priming Pump - Remove and Install
C280-16 Engine Refill Capacities
3516C HD Petroleum Well Service Engines Camshaft
3516C HD Petroleum Well Service Engines Jacket Water Cooling Circuit