Plate Locations and Film Locations
Show/hide table
| |
| Illustration 1 | g00123229 |
|
Typical serial number plate | |
The serial number plate is located on the left side of the cylinder block near the rear of the engine.
The following information is stamped on the serial number plate: engine serial number, model and arrangement number.
Show/hide table
| |
| Illustration 2 | g00755014 |
The information plate is on the valve cover.
The following information is stamped on the information plate: maximum altitude of the engine, horsepower, high idle, full load rpm, fuel settings and other information.
Caterpillar Information System:
C18 Generator Set Generator - Align
CT660 CX31 and CX31 HT On Highway Truck Power Train Electronic Control System Transmission, SPN 1716 - FMI 19
3406E and C15 Marine Engines Product Description
C15 Petroleum Engines Valve Mechanism Cover Base - Remove and Install
797F and 797F XQ Off-Highway Truck Braking System Gear Pump (Brake Cooling, Hoist)
Procedure for Replacing the Circuit Breaker Group on Certain Generator Sets{1420, 4461} Procedure for Replacing the Circuit Breaker Group on Certain Generator Sets{1420, 4461}
UPSB220 Uninterruptible Power Supply General Information
C15 Petroleum Engines Starting the Engine
320D and 323D Excavators Machine System Specifications Relief Valve (Main)
C27 and C32 Generator Set Engines Inlet Manifold Air Pressure Sensor
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784} Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
UPSB505 Uninterruptible Power Supply Performance - Check
CT660 CX31 and CX31 HT On Highway Truck Power Train Electronic Control System Transmission, SPN 1716 - FMI 9
3406E and C15 Marine Engines Coolant Level - Check
3406E and C15 Marine Engines Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
3406E and C15 Marine Engines Engine Speed/Timing Sensor - Clean/Inspect
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1482 - FMI 04
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1482 - FMI 03
G3516 Engines Temperature Sensor
C175-16 Marine Engines Belts - Inspect/Adjust/Replace
C18 Generator Set Bearing - Remove and Install
C175-16 Petroleum Generator Set Engines Coolant (DEAC) - Change
C27 and C32 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor
349F and 352F Excavators Quick Coupler Operation - Hydraulic Pin Grabber Quick Coupler (If Equipped)