Gear Pump (Brake Cooling, Hoist)
Show/hide table
| |
| Illustration 1 | g02513156 |
The pump must rotate freely by hand before and after you assemble the gear pump to the bevel gear case.
Lubricate the pump with oil before you operate the pump.
(1) Differential scavenge section
- Rotation ... Clockwise
- Test speed of the pump ... 900 rpm
- Test pressure of the pump ...
690 kPa (100.1 psi) - Minimum flow of the pump ...
90.0 L/min (23.78 US gpm) - Test speed of the pump ... 900 rpm
(2) Differential lubrication section
- Rotation ... Clockwise
- Test speed of the pump ... 900 rpm
- Test pressure of the pump ...
690 kPa (100.1 psi) - Minimum flow of the pump ...
56 L/min (14.8 US gpm) - Test speed of the pump ... 900 rpm
(3) Final drive lubrication section
- Rotation ... Clockwise
- Test speed of the pump ... 900 rpm
- Test pressure of the pump ...
690 kPa (100.1 psi) - Minimum flow of the pump ...
66.0 L/min (17.44 US gpm) - Test speed of the pump ... 900 rpm
Caterpillar Information System:
Procedure for Replacing the Circuit Breaker Group on Certain Generator Sets{1420, 4461} Procedure for Replacing the Circuit Breaker Group on Certain Generator Sets{1420, 4461}
UPSB220 Uninterruptible Power Supply General Information
C15 Petroleum Engines Starting the Engine
320D and 323D Excavators Machine System Specifications Relief Valve (Main)
C27 and C32 Generator Set Engines Inlet Manifold Air Pressure Sensor
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784} Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
UPSB505 Uninterruptible Power Supply Performance - Check
UPSB505 Uninterruptible Power Supply DC Capacitor - Replace
797F and 797F XQ Off-Highway Truck Power Train Solenoid Valve (Torque Converter Lockup Clutch)
UPSB505 Uninterruptible Power Supply AC Capacitor - Replace
C27 Petroleum Generator Set Engines Electrical Power Supply - Test
C3.4B Engines for Caterpillar Built Machines Electronic Control System
C15 Petroleum Engines Valve Mechanism Cover Base - Remove and Install
3406E and C15 Marine Engines Product Description
CT660 CX31 and CX31 HT On Highway Truck Power Train Electronic Control System Transmission, SPN 1716 - FMI 19
C18 Generator Set Generator - Align
3406E and C15 Marine Engines Plate Locations and Film Locations
CT660 CX31 and CX31 HT On Highway Truck Power Train Electronic Control System Transmission, SPN 1716 - FMI 9
3406E and C15 Marine Engines Coolant Level - Check
3406E and C15 Marine Engines Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
3406E and C15 Marine Engines Engine Speed/Timing Sensor - Clean/Inspect
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1482 - FMI 04
793F and 797F Off-Highway Trucks Braking System MID 116 - CID 1482 - FMI 03
G3516 Engines Temperature Sensor