CID 0004 FMI 02
Conditions Which Generate This Code:
The Electronic Control Module (ECM) detects the following condition:
- Data from the electronic unit injector for the No. 4 cylinder is out of limits.
- Diagnostic code 0168-01 is not active.
- Diagnostic codes 0004-05 and 0004-06 are not active.
- No 0041 diagnostic codes are active.
- No 0262 diagnostic codes are active.
- Diagnostic code 0190-08 is not active.
- No 0110 diagnostic codes are active.
System Response:
If equipped, the diagnostic lamp will flash and the derate lamp will come on. An active diagnostic code will be generated. The ECM will log the diagnostic code.
The engine will be derated while this diagnostic code is active.
Test Step 1. Perform the following diagnostic procedure: Injector Data Incorrect - Test
Results:
- OK - STOP
Caterpillar Information System:
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180} Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
2010/01/14 New Communication Software for the PL1000T Is Now Used on Commercial Engines {7606, 7620}
3508, 3512 and 3516 Generator Set Engines Camshaft Bearings - Install
C6.6 Generator Set CID 0003 FMI 06
C6.6 Generator Set CID 0003 FMI 05
C6.6 Generator Set CID 0003 FMI 02
3508, 3512 and 3516 Generator Set Engines Camshaft Bearings - Remove
C6.6 Generator Set CID 0002 FMI 06
C175-16 PETROLEUM ENGINES Connecting Rod Bearings - Remove and Install
C6.6 Generator Set CID 0002 FMI 05
C6.6 Generator Set CID 0002 FMI 02
C6.6 Generator Set CID 0001 FMI 06
C6.6 Generator Set CID 0004 FMI 05
C6.6 Generator Set CID 0004 FMI 06
C6.6 Generator Set CID 0100 FMI 03
C6.6 Generator Set CID 0100 FMI 04
C6.6 Generator Set CID 0100 FMI 10
C6.6 Generator Set CID 0110 FMI 03
C6.6 Generator Set CID 0110 FMI 04
C6.6 Generator Set CID 0168 FMI 00
3508, 3512 and 3516 Generator Set Engines Crankshaft - Remove
C6.6 Generator Set CID 0168 FMI 01
C6.6 Generator Set CID 0168 FMI 02
C6.6 Generator Set CID 0172 FMI 03