Front Housing and Covers
Show/hide table
Illustration 1 | g01860874 |
Typical example |
Tighten the setscrew to the sequence that is shown in illustration 1 to the following torque. ...
Show/hide table
Illustration 2 | g01860875 |
Typical example |
(1) Tighten the bolts that fasten the front cover to the front housing to the following torque. ...
(2) Tighten the bolts that fasten the water pump to the front housing to the following torque. ...
Note: Refer to Specifications, "Water Pump" for the correct bolt tightening sequence for the water pump.
Caterpillar Information System:
C13 Engine for Caterpillar Built Machines Electronic Unit Injector Sleeve - Remove and Install
C9.3 Tier 4 Interim Engines Oil Contains Fuel
C9.3 Engines for Caterpillar Built Machines Oil Pressure Is Low
C13 Engine for Caterpillar Built Machines Fuel Pressure Regulator - Remove and Install
C6.6 Industrial Engine Boost Pressure Sensor
CX31-P600 Petroleum Transmission Well Servicing Modulating Valve (Transmission Clutch) - Remove and Install
CX35-P800 Petroleum Transmission and Petroleum Power Train Packages Modulating Valve (Transmission Clutch) - Remove and Install
C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Assemble
C6.6 Industrial Engine Camshaft Bearings
C13 Engines for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
C7.1 Engines for Caterpillar Built Machines Vibration Damper and Pulley
C7.1 Industrial Engine and Generator Set System Overview
C7.1 Industrial Engine Turbocharger - Series Turbochargers
C6.6 Industrial Engine Electronic Control Module
C13 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove
C6.6 Industrial Engine Crankcase Breather
C6.6 Industrial Engine Valve Mechanism Cover
C13 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Install
C7.1 Engines for Caterpillar Built Machines Glow Plugs
C4.4 Industrial Engine Fuel Injection Nozzles
C13 Engine for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
C13 Engine for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
C7.1 Engines for Caterpillar Built Machines Crankshaft
C11 and C13 Engines Fuel Pressure Sensor