C13 Engine for Caterpillar Built Machines Caterpillar


Valve Mechanism Cover Base - Remove and Install

Usage:

730C2 2T4

Removal Procedure

Start By:

  1. Remove the valve cover.


    Illustration 1g01861473

  1. Disconnect harness assembly (1).


    Illustration 2g01861475

  2. Loosen hose clamp (4). Remove bolts (3) and remove breather (2).


    Illustration 3g01861477

  3. Remove element (5).


    Illustration 4g01861478

  4. Disconnect harness assemblies (6) and (8). Remove valve cover base (7).


    Illustration 5g01861512

  5. Remove seal (9) from valve cover base (7).

Installation Procedure

  1. Install valve cover base (7) in reverse order of removal.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.